Canon n1000 사용자 가이드

Print Job Results Abnormal

Problem 1: Printhead is out of alignment.

Solution:

Use the printer operation panel to align the printhead with the “Adj. 
Printhead” feature. (ÆP.6-26)

Problem 1: Data from the print job data stream has been lost.

Solution:

Switch the printer and computer off, then switch them on again and start 
the print job again.

Problem 2: Another printer driver was selected for the print job.

Solution:

Select the correct printer driver for the printer and try again. (ÆSetup 
Guide)

Problem 3: The computer cannot communicate with the printer by bi-directional data 

transfer when connected via the parallel port.

Solution:

Open the Setup Menu on the printer operation panel, select Set Centronics 
Interactive then select None. (ÆP.4-9)

Problem 4: Font selected for printing not supported.

Solution:

Make sure that the font used in the text of the software application has 
been installed correctly. For details, see your software application manual.

Problem 1: If you are using Windows XP or Windows 2000, the Fast Graphic Process 

setting is enabled.

Solution:

In the printer driver open the Finishing sheet, open the Special Settings 
dialog box, then click the Fast Graphic Process check box off, and print 
again. (ÆPrinter driver online Help)

00_J80xUG_Eng.book  Page 9  Friday, April 12, 2002  12:28 AM