Canon ip4500 빠른 설정 가이드

Troubleshooting

Print Head nozzles are clogged.

Print the nozzle check pattern to check for uneven ink output.
For details on how to print the nozzle check pattern, how to clean the Print 
Head, and how to perform Print Head Deep Cleaning, see “When Printing 
Becomes Faint or Colors Are Incorrect” on page 34.
z

If the nozzle check pattern does not print out properly
Check if any of the missing colors are due to empty tanks.
If there is plenty of ink and the printer does not print, clean the Print Head 
and then print the nozzle check pattern to check that ink is ejecting properly.

z

If the problem is not resolved after performing Print Head Cleaning 
twice
Perform Print Head Deep Cleaning.
If the problem is not resolved after performing Print Head Deep Cleaning, 
turn off the printer and perform Print Head Deep Cleaning again after 24 
hours or later.

z

If the problem is still not resolved after performing Print Head Deep 
Cleaning twice
The Print Head may be damaged. Contact your Canon Service 
representative.

Ink tank is empty.

Open the Top Cover of the printer to confirm how the ink lamps light or flash, 
and then take the appropriate action depending on the error condition. For 
details, see “Getting the Ink Status Information” on page 28.

The protective film is remaining.

Make sure all of the protective film is peeled off and the air hole is exposed, as 
illustrated in (A). If the orange tape is left as in (B), pull the orange tape and 
remove it.

(A) Correct

L-shaped air hole is exposed.

(B) Incorrect

The tape is not peeled off.

(B)

(A)