Canon lbp5970 사용자 가이드
63
Step
8
Installing a Hard Disk
A hard disk is to be installed in the hard disk slot of the printer unit. Make sure
that all the following items are contained in the package before installing a
hard disk. If any item is missing or damaged, please contact your local
authorized Canon dealer.
that all the following items are contained in the package before installing a
hard disk. If any item is missing or damaged, please contact your local
authorized Canon dealer.
A Phillips screwdriver is required for installing a hard disk. Have a screwdriver
ready in advance that matches the size of the screws.
ready in advance that matches the size of the screws.
Observe the following guidelines when installing the hard disk.
CAUTION
•
Be sure to turn the printer OFF, and then disconnect all the interface
cables and power cord from the printer before installing the hard
disk. Failure to observe these steps may result in an electrical shock.
•
Be careful when handling a hard disk. Touching the edges or a sharp
portion of a hard disk may result in personal injury.
IMPORTANT
•
The hard disk contains components that are sensitive to static electricity.
Observe the following precautions when handling them to prevent damage
from static electricity.
- Touch a metal object to dissipate static electricity before handling them.
- When handling them, do not touch anything that generates static
electricity such as the computer display.
- Do not touch the hard disk parts, printed wire, or connectors with your
hands.
- To prevent the hard disk from being affected by static electricity, keep it in
the protective bag until it is ready to be installed. Also, keep the hard disk
away from products that generate strong magnetic waves.
•
Do not drop or jolt the hard disk.
•
Because the hard disk is a precision device, do not press on the top of its
drive, place it over another, or hit it against other objects.
•
Be sure not to remove any label or others attached to the top of the drive
of the hard disk. Also, do not attach any other labels.
•
Do not move the hard disk suddenly from a cool location to a hot location.
•
After installing the hard disk, you need to initialize the SETUP menu.
Therefore, if you have changed the printer setting, output the Configuration
Page Print and confirm and save the status of the printer setting before
installing the hard disk. For details on the procedure for outputting
Configuration Page Print, see "Checking the Operations with Configuration
1
Turn the printer and computer OFF a, remove the USB
cable b, and then disconnect the power plug from the AC
power outlet c.
Hard Disk
Guide sheet
Shut Down label
Screws
(2 pieces)
Encrypted Secured Print Driver
Add-in For Client PC
a
a
b
c