Canon lbp5970 사용자 가이드

Step

IMPORTANT

The hard disk is formatted automatically after you install the hard disk,

initialize the SETUP menu, and start the printer. If the format is not

performed at this point, perform QUICK FORMAT in HDD MAINTENANCE

in the SETUP menu. For more details, see "Chapter 5 Printing

Environment Settings" in

User's Guide.

NOTE

After installing the hard disk, you have to specify the settings for the

optional accessories in the [Device Settings] sheet in the printer driver. You

can obtain the status of the optional accessories automatically by clicking

[Get Device Status] in the [Device Settings] sheet.

If you cannot obtain the status of the optional accessories automatically,

select the [Hard Disk Installed] check box.

Installing NB-W2

Make sure that all the following items are contained in the package before
installing NB-W2. If any item is missing or damaged, please contact your
local authorized Canon dealer.

CAUTION

•

Be sure to turn the printer OFF, and then disconnect all the interface

cables and power cord from the printer before installing NB-W2. If

you attempt to install NB-W2 when the printer is ON or any cable is

connected to the printer, this may result in an electrical shock.

•

Be careful when handling NB-W2. Touching the edges or a sharp

portion of NB-W2 may result in personal injury.

IMPORTANT

•

NB-W2 contains components that are sensitive to static electricity.

Observe the following precautions when handling NB-W2 to prevent

damage from static electricity.

- Touch a metal object to dissipate static electricity before handling it.

- When handling it, do not touch anything that generates static electricity

such as a computer display.

- Do not touch the NB-W2 parts, printed wire, or connectors with your

hands.

- To prevent NB-W2 from being affected by static electricity, keep it in the

protective bag until it is ready to be installed. The protective bag is

required after NB-W2 is removed. Keep the protective bag. Do not

discard it.

•

You cannot use NB-W2 simultaneously with the network interface

(standard network) the printer has.

Specify the interface to be used in PRIMARY NETWORK in EXTENSION

CARD in the INTERFACE MENU options in the SETUP menu. For more

details, see User's Guide supplied with NB-W2.

Turn the printer and computer OFF a, remove the USB

cable b, and then disconnect the power plug from the AC

power outlet c.

CD-ROM

Screws

(2 pieces)

Guide booklet

Wireless Network

Interface Board NB-W2

CD-ROM