Muratec F-525 설치 설명서

Installation Manual

NOTE: If a DHCP (Dynamic Host Configuration Protocol) server is not installed 

on your network or if you are not installing the machine on a network, the 

message will read “DHCP server did not respond“. You will need to turn 

off the DHCP server manually as described in “If your network is not using 

DHCP” on page 16.

 

  When the machine is turned on, the display shows the following message:

 

  Press <Setting>, < >, <1>, <4> in this order.

 

  Press [OFF], and then [Enter].

 

  Go back to page 11 Step 7 “Turn the power on” step 3.

Installation_Manual.indd   12

2007/04/27   12:11:39