Ricoh 3224C 네트워크 가이드
Monitoring and Configuring the Printer
102
4
smb
Use the “smb” command to configure
or delete the computer or workgroup
name for SMB.
or delete the computer or workgroup
name for SMB.
❖
❖
❖
❖ Computer Name settings
msh> smb comp
• Set computer name using up to
15 characters. Names beginning
with "RNP" or "rnp" cannot be
entered.
with "RNP" or "rnp" cannot be
entered.
❖
❖
❖
❖ Working Group Name settings
msh> smb group
• Set workgroup name using up
to 15 characters
❖
❖
❖
❖ Comment settings
msh> smb comment
• Set comment using up to 31
characters
❖
❖
❖
❖ Notify print job completion
msh> smb notif {on | off}
• To notify print job completion,
specify “on”. Otherwise, specify
“off”
“off”
❖
❖
❖
❖ Deleting Computer Name
msh> smb clear comp
❖
❖
❖
❖ Deleting Group Name
msh> smb clear group
❖
❖
❖
❖ Deleting Comment
msh> smb clear comment
❖
❖
❖
❖ Protocol settings
msh> smb protocol [netbeui
{up | down} | tcpip {up |
down}]
{up | down} | tcpip {up |
down}]
• Enable or disable NetBEUI and
TCP/IP. Specify “up” to enable,
and “down” to disable.
and “down” to disable.
snmp
Use the “snmp” command to display
and edit SNMP configuration settings
such as the community name.
and edit SNMP configuration settings
such as the community name.
❖
❖
❖
❖ View settings
msh> snmp
• Default access settings 1 is as
follows:
Community name:public
IP address:0.0.0.0
Access type:read-only / trap off
Community name:public
IP address:0.0.0.0
Access type:read-only / trap off
• Default access settings 2 is as
follows:
Community name:admin
IP address:0.0.0.0
Access type:read-write / trap
off
Community name:admin
IP address:0.0.0.0
Access type:read-write / trap
off
• If "-p" is added, you can view
settings one by one.
• To display the current commu-
nity, specify its registration
number.
number.
❖
❖
❖
❖ Display
msh> snmp ?
❖
❖
❖
❖ Community name configuration
msh> snmp “number” name
“community_name”
“community_name”
• You can configure ten SNMP
access settings numbered 1-10.
• The printer cannot be accessed
from SmartDeviceMonitor for
Admin or SmartDeviceMonitor
for Client if “public” is not reg-
istered in numbers 1-10. When
changing the community name,
use SmartDeviceMonitor for
Admin and SNMP Setup Tool
to correspond with printer set-
tings.
Admin or SmartDeviceMonitor
for Client if “public” is not reg-
istered in numbers 1-10. When
changing the community name,
use SmartDeviceMonitor for
Admin and SNMP Setup Tool
to correspond with printer set-
tings.
• The community name can be
entered using up to 15 charac-
ters.
ters.