Ricoh 2035e 사용자 설명서

Appendix

94

❖

❖

❖

❖ Display

Shows SNMP information and
available protocols.

msh> snmp ?
The following command displays
the settings of registered number
specified.

msh> snmp [registered_number]
Omitting the number displays all
access settings.

❒ Add “-p” (as above) to have the

in formation  d is played one
screen at a time.

❖

❖

❖

❖ Community name configuration

You can set the community name
of the registered number.

m s h >   s n m p   n u m b e r   n a m e
community_name

❒ The community name can con-

sist of up to 15 characters.

❖

❖

❖

❖ Access type configuration

You can select the access type from
those listed below:
m s h >   s n m p   n u m b e r   t y p e
access_type

❖

❖

❖

❖ Protocol configuration

You should use the following com-
mand to set protocols to active or
inactive. If you set a protocol to in-
active, all access settings for that
protocol will be disabled:

• “on” means active, “off” means

inactive.

To change an access setting proto-
col, use the following command.
However, if you have disabled a
protocol using the above com-
mand, making it active here will
have no effect.

msh> snmp number active
{ip | ipx} {on | off}

❖

❖

❖

❖ Access configuration

You can configure a host address
according to protocols used.
The network interface board ac-
cepts requests only from hosts with
“read-only” or “read-write” access
type addresses. Enter “0” to have
the network interface board accept
requests from any host without re-
quiring a specific type of access.

msh> snmp number {ip | ipx}
address

❒ To specify TCP/IP protocol, en-

ter "ip" followed by a space, and
then the IP address.

❒ To specify the IPX/SPX proto-

col, enter "ipx" followed by a
space, and then the IPX address
followed by a decimal, and then
the MAC address of the net-
work interface board.

The following is a sample configu-
r a ti on   u s i n g  th e   r eg i s t r a t i o n
number 3 with the IP address
192.168.15.16:
msh> snmp 3 ip 192.168.15.16

read Read 

only

write Read 

and 

write

trap 

User notified of trap mes-
sages.

no All 

access 

denied.