Ricoh 2035e 사용자 설명서
Faxing
28
2
B
Place the original.
Note
r You can scan a few pages of
your original from the exposure
glass and the remaining pages
from the ADF. When you have
finished scanning from the ex-
posure glass, remove the origi-
nal from the exposure glass and
place the remaining pages in the
ADF within ten seconds.
glass and the remaining pages
from the ADF. When you have
finished scanning from the ex-
posure glass, remove the origi-
nal from the exposure glass and
place the remaining pages in the
ADF within ten seconds.
r To send two or more pages us-
ing the exposure glass, set them
one page at a time.
one page at a time.
r The original can be placed
whenever, before the {Start} key
is pressed.
is pressed.
Reference
C
Select the scan settings you re-
quire.
quire.
Reference
D
Dial a destination.
Note
r If you make a mistake, press the
{Clear/Stop} key, and then enter
the correct number.
the correct number.
Reference
p.36 “Specifying a Destination”
p.47 “Chain Dial”, Facsimile Ref-
erence <Advanced Features>
p.47 “Redial”, Facsimile Refer-
ence <Advanced Features>
p.47 “Chain Dial”, Facsimile Ref-
erence <Advanced Features>
p.47 “Redial”, Facsimile Refer-
ence <Advanced Features>
E
Press the {Start} key.
Note
r Do not lift the ADF during scan-
ning.
After transmission, the standby
display appears.
display appears.
-Sending originals using the
exposure glass
A
Make sure that Immed. TX is se-
lected. If it is not, press
lected. If it is not, press
[
Immed. TX
]
.
B
Place the first page face down on
the exposure glass.
the exposure glass.
C
Dial a destination.
D
Make the scan settings you re-
quire.
quire.
E
Press the {Start} key.