Ricoh 3224C 사용자 설명서
Using NetWare
65
3
G
On the [Available Options] menu,
click [Print Server Information], and
then press the
click [Print Server Information], and
then press the
{ENTER} key.
H
To create a new print server, press
the
the
{INSERT} key, and then enter a
print server name.
For a currently defined print serv-
er, select a print server in the [Print
Server]
For a currently defined print serv-
er, select a print server in the [Print
Server]
list.
Use the same printer name speci-
fied using NIB Setup Tool.
fied using NIB Setup Tool.
I
From the [Print Server Information]
menu, select [Print Server Configura-
tion]
menu, select [Print Server Configura-
tion]
.
J
From the [Print Server Configuration]
menu, select [Printer Configuration].
menu, select [Printer Configuration].
K
Select the printer indicated as [Not
Installed]
Installed]
.
Use the same printer number spec-
ified as the remote printer number
using NIB Setup Tool.
ified as the remote printer number
using NIB Setup Tool.
L
To change the printer name, enter
a new name.
A name “Printer x” is assigned to
the printer. The “x” stands for the
number of the selected printer.
a new name.
A name “Printer x” is assigned to
the printer. The “x” stands for the
number of the selected printer.
M
As type, select [Remote Parallel, LPT1].
The IRQ, Buffer size, Starting form,
and Queue service mode are auto-
matically configured.
The IRQ, Buffer size, Starting form,
and Queue service mode are auto-
matically configured.
N
Press the
{ESC} key, and then
click [Yes] on the confirmation
message.
message.
O
Press the
{ESC} key to return to
[Print Server Configuration Menu]
.
P
Assign print queues to the created
printer.
printer.
Q
From [Print Server Configuration Menu],
select [Queues Serviced By Printer].
select [Queues Serviced By Printer].
R
Select the printer created.
S
Press the
{INSERT} key to select a
queue serviced by the printer.
You can select several queues.
You can select several queues.
T
Follow the instructions on the
screen to make other necessary
settings.
Following these steps, check that
the queues are assigned.
screen to make other necessary
settings.
Following these steps, check that
the queues are assigned.
U
Press the
{ESC} key until "Exit?"
appears, and then select [Yes] to
exit PCONSOLE.
exit PCONSOLE.
V
Start the print server by entering
the following from the console of
the NetWare server.
If the print server is in operation,
quit and restart it.
the following from the console of
the NetWare server.
If the print server is in operation,
quit and restart it.
❖ To quit
CAREE: unload pserver
❖ To start
C A R E E : l o a d p s e r v e r
print_server_name
print_server_name
Note
❒ If the printer works as config-
ured, the message "Waiting for
job" appears.
job" appears.