Ricoh 2232c 사용자 가이드
User Tools Menu (System Settings)
33
3
Network Configuration
Any change you make with User
Tools remains in effect even if the
main power switch or operation
switch is turned off, or the
Tools remains in effect even if the
main power switch or operation
switch is turned off, or the
{{{{Energy
Saver
}}}} or {{{{Clear Modes}}}} key is pressed.
Configuring the network using the
control panel
control panel
Note
❒ Operations for System Settings are
different from normal operations.
After using User Tools, press the
After using User Tools, press the
{{{{User Tools/Counter}}}} key to exit.
❒ If the [Key Operator Code] has been
set, the key operator code entry
screen appears. Enter the code, and
then press [OK]. See General Set-
tings Guide.
screen appears. Enter the code, and
then press [OK]. See General Set-
tings Guide.
AAAA
Press the
{{{{User Tools/Counter}}}} key.
Note
❒ The machine will be offline dur-
ing setting.
BBBB
Press [System Settings].
CCCC
Press [Interface Settings] or [File
Transfer]
Transfer]
.
DDDD
Select the required menu, and
then press the desired key.
then press the desired key.
EEEE
Change settings by following the
instructions on the display panel,
and then press [OK].
instructions on the display panel,
and then press [OK].
Note
❒ To cancel changes made to set-
tings and return to theSystem
Settings menu, press [Cancel].
Settings menu, press [Cancel].
FFFF
Press [Exit].
GGGG
Press the
{{{{User Tools/Counter}}}} key.
Note
❒ You can also exit by pressing
[Exit]
on the User Tools main
menu.
ZKVS030E