Ricoh fax3310le 사용자 가이드
Replacing the ADF Maintenance Kit
111
9
Replacing the ADF Maintenance Kit
In order to ensure maximum perfor-
mance of your fax machine, the ADF
Maintenance Kit is provided. You can
replace the ADF Maintenance Kit af-
ter approximately 45,000 originals
have been scanned with the ADF.
You need to replace the ADF Mainte-
nance Kit when you are prompted to
do so by a message on the display:
mance of your fax machine, the ADF
Maintenance Kit is provided. You can
replace the ADF Maintenance Kit af-
ter approximately 45,000 originals
have been scanned with the ADF.
You need to replace the ADF Mainte-
nance Kit when you are prompted to
do so by a message on the display:
Follow the procedure below to re-
place the ADF Maintenance Kit.
place the ADF Maintenance Kit.
Note
❒ If your service representative is re-
sponsible for performing this oper-
ation, this message will not appear.
ation, this message will not appear.
❒ If you do not have an ADF Mainte-
nance Kit when you are prompted
to replace the ADF Maintenance
Kit, or if you do not have time to
perform the maintenance at that
time, at step
to replace the ADF Maintenance
Kit, or if you do not have time to
perform the maintenance at that
time, at step
C below, select "No",
and then press the
{{{{OK}}}} key to re-
turn to the standby display so you
can continue using the fax ma-
chine. However, after you scan an
additional 100 originals with the
ADF, you will be prompted once
again to replace the ADF Mainte-
nance Kit.
can continue using the fax ma-
chine. However, after you scan an
additional 100 originals with the
ADF, you will be prompted once
again to replace the ADF Mainte-
nance Kit.
❒ After “Change ADF Maintenance
Kit” message appears in the dis-
play, you can continue to send fax
messages and perform other oper-
ations.
play, you can continue to send fax
messages and perform other oper-
ations.
AAAA
A message on the display prompts
you to replace the ADF Mainte-
nance Kit when it is time for re-
placement.
you to replace the ADF Mainte-
nance Kit when it is time for re-
placement.
BBBB
Press the
{{{{OK}}}} key.
CCCC
Make sure that "Yes" is selected,
and then press the
and then press the
{{{{OK}}}} key.
Note
❒ If you want to replace the ADF
Maintenance Kit later, press
0
or
1 to select "No", and then
press the
{{{{OK}}}} key. If you re-
place the ADF Maintenance kit
when ”Change ADF Mainte-
nance Kit” message is not dis-
played, you must reset the ADF
counter. See p.67 “Resetting the
ADF Counter”
when ”Change ADF Mainte-
nance Kit” message is not dis-
played, you must reset the ADF
counter. See p.67 “Resetting the
ADF Counter”
DDDD
To replace the ADF Maintenance
Kit, follow the instructions in
"Replacing the ADF Maintenance
K i t" s u p p li ed w it h t h e A D F
Maintenance Kit.
Kit, follow the instructions in
"Replacing the ADF Maintenance
K i t" s u p p li ed w it h t h e A D F
Maintenance Kit.
EEEE
Press the
{{{{OK}}}} key.
The ADF counter is reset automat-
ically.
ically.
StellaF15_EN_Combine_F1_Pre_FM.book Page 111 Friday, August 27, 2004 6:23 PM