Haier ab142acbac 사용자 설명서

다운로드
페이지 24
TROUBLE SHOOTING
22
The following symptoms are not faults
Symptom
Reason
Conditioner
doesn't work
When stop machine then continue
operation.
When press temp setting key and release
at once.
When power turns on.
When humidity too high in the cooling
operation (high content of oil or just in
room).
When heating has started after defrosting.
During stopping the machine.
As it starts buzzing noises exist.
Constant noise in cooling or heating.
There are noises when start, stop and
defrosting begins, stops.
There are constant noise during operation
or after operation.
Noise during operation and after
operation.
Start after a long term of unuse.
In operation
White fog is
blown out
Outdoor unit
turns hot
Conditioner
makes noise
Conditioner give
out smell
Conditioner blow
out dust
The operation indicating lamp lights on
the remote controller is not fault; safety
unit is protecting the machine; after 3
minute the machine automatically start.
The computer is ready to operate, wait
for 1 minute or so.
Uncleaness of the indoor unit can cause
temp. fluctuation.
*1
The frost removed turns into rising
vapour.
Compressor is preheating so that the
conditioner start smoonthy.
The noise is existing after temp.controller
operates, 1 minute after turn weak.
There is sound of gaseous refrigerant
flowing in the conditioner.
The sound given out when gaseous
coolant stop folwing or switching.
It's the sound of operation of discharging
system. *2
Resin part expands or contract due to
temp. change and give out this sound.
Dust in indoor unit is blown out.
Room smell or cigarrette smell sucked
into indoor unit is blown out.
NOTE
The inner part of indoor unit must be cleaned. Consult dealer, because clean must be done
by technician.
In cooling operation, discharging system discharge water in room.
*2
*1