Haier 29f9b 사용자 설명서
Antenna
Figure A
Figure B
Antenna cable
with a plug
with a plug
Figure C
Figure D
Antenna feeder
Antenna adapter
75-300
Coaxial cable(75
Ω
) twin-lead cable(300
Ω
)
FUNCTION BUTTONS AND EXTERNAL SOCKETS
①Remote sensor:let the remote controller aim here the set can receive remote
control signal.
②Power switch:press the button to turn on the TV set . press the button again to turn
off the TV set.
③Power indicator: the indicator lights in standby status ,the indicator lights in sleep
status . The indicator glints when you use remote controller.
④Menu button
⑤Program up/down button
⑥Volume up/down button
⑦TV/AV
control signal.
②Power switch:press the button to turn on the TV set . press the button again to turn
off the TV set.
③Power indicator: the indicator lights in standby status ,the indicator lights in sleep
status . The indicator glints when you use remote controller.
④Menu button
⑤Program up/down button
⑥Volume up/down button
⑦TV/AV
2.Rear Panel
1.Front Panel
S-VIDEO input
SCART1 socket
SCART2 socket
Antenna input
SCART1 socket
SCART2 socket
Antenna input
⑧
⑨
⑩
11
①
②
③
⑧
⑨
11
SCART1
SCART2
S-VIDEO
AV IN1
AUDIO-R
AUDIO-L
VIDEO
AUDIO-R
AUDIO-L
VIDEO
MENU
V-
V+ P-
P+
⑤
⑥
⑦
⑥
⑦
④
TV/AV
FUNCTION BUTTONS AND EXTERNAL SOCKETS
3
4
⑩
Antenna connection
Connect an antenna to the antenna socket on
the TV set, We recommend using a Cable TV
system for better picture and audio quality.
1.If you use a coaxial cable(75Ω),insert the
antenna plug (see figure C) into 75Ωsocket
(see figure A).
2.If you use a twin-lead cable(300Ω),please
shape the cable as figure D, and connect the
leads to antenna adapter and then insert the
antenna adapter into the 75Ωsocket.(see
figure B)
Connect an antenna to the antenna socket on
the TV set, We recommend using a Cable TV
system for better picture and audio quality.
1.If you use a coaxial cable(75Ω),insert the
antenna plug (see figure C) into 75Ωsocket
(see figure A).
2.If you use a twin-lead cable(300Ω),please
shape the cable as figure D, and connect the
leads to antenna adapter and then insert the
antenna adapter into the 75Ωsocket.(see
figure B)
Power source wire connection
Insert the power plug into AC outlet.
Install and replace batteries of the
remote control unit:
1.Place the remote control unit with the face
down, then open the battery cover of the
unit.
2.Place the two"AA"size batteries, matching
the + and - signs on each battery to the +
and -signs of the battery compartment.
3.Close the cover of the battery compartment.
NOTE:
(1)Don't drop or wet or dismantle the unit.
(2)If you don't intend to use the unit for a
long period or the electricity of the
batteries is used up, remove the batteries
to prevent batteries acid from leaking
into the battery compartment.
(3)Replace the two old batteries at the
same time.
(4)Don't use charge battery (Ni-cd )and
don't mix battery type.
(5)Don't throw your batteries into a fire.
Dispose of your batteries in a required
place.
Insert the power plug into AC outlet.
Install and replace batteries of the
remote control unit:
1.Place the remote control unit with the face
down, then open the battery cover of the
unit.
2.Place the two"AA"size batteries, matching
the + and - signs on each battery to the +
and -signs of the battery compartment.
3.Close the cover of the battery compartment.
NOTE:
(1)Don't drop or wet or dismantle the unit.
(2)If you don't intend to use the unit for a
long period or the electricity of the
batteries is used up, remove the batteries
to prevent batteries acid from leaking
into the battery compartment.
(3)Replace the two old batteries at the
same time.
(4)Don't use charge battery (Ni-cd )and
don't mix battery type.
(5)Don't throw your batteries into a fire.
Dispose of your batteries in a required
place.