Haier 29F9D 사용자 설명서
BASIC FEATURE
TECHNICAL SPECIFICATION
2
Stage curtain for open and close effect
218 programs stored
Multi-picture modes and sound modes selection
On/Off timer
Child lock
Soft exchange
Count
Appointment
DVD component input
218 programs stored
Multi-picture modes and sound modes selection
On/Off timer
Child lock
Soft exchange
Count
Appointment
DVD component input
Antenna connection
Connect an antenna to the antenna socket on
the TV set, we recommend using a Cable TV
system for better picture and audio quality.
1.If you use a coaxial cable(75
Connect an antenna to the antenna socket on
the TV set, we recommend using a Cable TV
system for better picture and audio quality.
1.If you use a coaxial cable(75
),insert the
antenna plug (see figure C) into 75
socket
(see figure A).
2.If you use a twin-lead cable(300
2.If you use a twin-lead cable(300
),please
shape the cable as figure D, and connect the
leads to antenna adapter and then insert the
antenna adapter into the 75
leads to antenna adapter and then insert the
antenna adapter into the 75
socket (see
figure B).
Power source wire connection
Insert the power plug into AC outlet.
Install and replace batteries of the
remote control unit:
1.Place the remote control unit with the face
down, then open the battery cover of the
unit.
2.Place the two"AA"size batteries, matching
the + and - signs on each battery to the +
and -signs of the battery compartment.
3.Close the cover of the battery compartment.
NOTE:
(1)Don't drop or wet or dismantle the unit.
(2)If you don't intend to use the unit for a
long period or the electricity of the
batteries is used up, remove the batteries
to prevent batteries acid from leaking
into the battery compartment.
(3)Replace the two old batteries at the
same time.
(4)Don't use charge battery (Ni-cd )and
don't mix battery type.
(5)Don't throw your batteries into a fire.
Dispose of your batteries in a required
place.
Insert the power plug into AC outlet.
Install and replace batteries of the
remote control unit:
1.Place the remote control unit with the face
down, then open the battery cover of the
unit.
2.Place the two"AA"size batteries, matching
the + and - signs on each battery to the +
and -signs of the battery compartment.
3.Close the cover of the battery compartment.
NOTE:
(1)Don't drop or wet or dismantle the unit.
(2)If you don't intend to use the unit for a
long period or the electricity of the
batteries is used up, remove the batteries
to prevent batteries acid from leaking
into the battery compartment.
(3)Replace the two old batteries at the
same time.
(4)Don't use charge battery (Ni-cd )and
don't mix battery type.
(5)Don't throw your batteries into a fire.
Dispose of your batteries in a required
place.
PREPARING FOR OPERATIONS
3
Figure A
Figure B
Antenna cable
with a plug
Figure C
Figure D
Antenna feeder
Antenna adapter
75-300
¦¸
Coaxial cable(75
) twin-lead cable(300
)
Antenna
1.CRT: 29"
2.COLOUR SYSTEM: PAL N
2.COLOUR SYSTEM: PAL N
TSC3.58/4.43(AV)
3.AUDIO SYSTEM: BG
4.POWER SUPPLY: ~220V 50Hz
5.POWER SUPPLY VOLTAGE RANGE: ~160V -250V 50/60Hz
5.POWER CONSUMPTION: 155W
6.ANTENNA INPUT IMPEDANCE : 75
4.POWER SUPPLY: ~220V 50Hz
5.POWER SUPPLY VOLTAGE RANGE: ~160V -250V 50/60Hz
5.POWER CONSUMPTION: 155W
6.ANTENNA INPUT IMPEDANCE : 75
7.VIDEO INPUT: 1.0Vp-p( 75
)
8.VIDEO OUTPUT: 1.0Vp-p( 75
)
9.AUDIO INPUT: 400Vrms(40k
)
10.AUDIO OUTPUT: 400Vrms(600k
)
11.SOUND OUTPUT POWER: 10W+10W
Supplied accessories:
Infrared remote control handset 1
Battery(AA) 2
Operating instruction 1
Design and specifications are subject to change without notice.
Infrared remote control handset 1
Battery(AA) 2
Operating instruction 1
Design and specifications are subject to change without notice.