Haier hl32xsl2 사용자 가이드

Installation

output analog and digital RGB simultaneously, 

connect only one of either VGA IN or HDMI IN to 

display the VGA on the TV.

If the graphic card on the computer does output 

 •

analog and digital RGB simultaneously, set the TV 

to either VGA or HDMI; (the other mode is set to 

Plug and Play automatically by the TV.)

Then, make the corresponding audio connection. 

C

If using a sound card, adjust the VGA sound as 
required.

Back of TV

Turn on the computer and the TV.

A

Use INPUT on the remote control to select VGA or 

B

HDMI source.

Check the image on your TV. There may be noise 

C

associated with the resolution, vertical pattern, 
contrast or brightness in VGA mode. If noise 
is present, change the VGA mode to another 
resolution, change the refresh rate to another rate 
or adjust the brightness and contrast on the menu 
until the picture is clear. If the refresh rate of the VGA 
graphic card can not be changed, change the VGA 
graphic card or consult the manufacturer of the VGA 
graphic card.

Use a DVI cable.

 

R

Avoid keeping a fixed image on the TV’s screen 

 

R

for a long period of time. The fixed image may 

become permanently imprinted on the screen.

The synchronization input form for Horizontal and 

 

R

Vertical frequencies is separate.

Y

VGA

640

×480

60 Hz

SVGA

800

×600

60 Hz
75 Hz

XGA

1024

×768

60 Hz
75 Hz

Connect the source device to HDMI port of this TV 

A

with an HDMI cable (not supplied with this product).

No separated audio connection is necessary.

B

If the source device supports Auto HDMI function, 

 •

the output resolution of the source device will be 
automatically set to 1280

×720 p.

If the source device does not support Auto HDMI, 

 •

you need to set the output resolution appropriately. 
To get the best picture quality, adjust the output 
resolution of the source device to 1280

×720 p.

Select HDMI input source in input source option of 

 •

Select Main source menu.

Connect the source device to HDMI port of this TV 

A

with a HDMI-to-DVI cable (not supplied with this 
product).

A separated audio connection is necessary.

B

 

C

If the source device has an analog audio output 
connector, connect the source device audio output to 
DVI Audio In port located on the left side of HDMI port.