Haier hl32xk2 사용자 가이드

Universal Remote Control

(TV, VCR, DVD,STB, cable box or audio equipment).

Choose the device you wish to program.

B

While Press and holding ENTER key, press the INPUT 

C

key and device LED will be ON. Keep the status for 

about 3 seconds and the LED will blink, indicating 

that the Controller is ready for programming, then 

release both keys.

Press and release the Mute key to enter automatic 

D

scan mode. And the remote will automatically 

sending codes to the device per 2 seconds.

When the device turns ON, press 

E

ENTER key to 

program the Controller with the new code, saving it 

to EEPROM and exit.

Press 

F

POWER key, If the device responds, no further 

programming is required. If the device does not 

respond repeat steps 1 through 5.

After searching the entire data base, this mode will be 

G

automatically exited and led will blink for 3 times. The 

codeset is not saved to EEPROM.

In automatic scan mode, press any key other than 
ENTER key will exit without programming.

Choose the device you wish to program.

A

To enter display mode, while press and holding 

B

ENTER key, press the INPUT key and device LED will 
be ON, keep the status for about 3 seconds and the 

LED will blink, indicating that the Controller is ready 

for programming, then release both keys.

Sequence press 9, 8, 0 to enter display mode.

C

Press digit 1 key to get the first digit of current 

D

codeset. For example, if the first digit of codeset is 1, 

so then led will blink once and remains OFF. Digit “0” 

in codeset will not be displayed. Blink Freq is 1 HZ.

Press digit 2 key to get the second digit of current 

E

codeset. For example, if the second digit of codeset is 

3, so then led will blink three times and remains OFF. 

Blink Freq is 1 HZ.

Press digit 3 key to get the third digit of current 

F

codeset. Blink Freq is 1 HZ.

Only digit 1, 2, 3 are valid in this mode. And the 

G

sequence is not fixed.

Controller will not send out data in this mode if user 
presses any keys other than digit 1, 2, 3, or no key was 
pressed in 30 seconds, display mode is ended.

The Controller provides two punch-through features 
that allow users to control TV volume and DVD or VCR 
operation while the Controller is in another device mode 
control certain features of another device.

Y

The TV Volume/Mute punch-through feature allows 
you to control the volume and mute function of your 
TV while the Controller is in another device mode. The 
feature is applicable for all devices and brands that do 
not use the volume control buttons for other purposes.

Y

The DVD or VCR transport key punch through feature 
lets you control the PLAY, STOP, PAUSE, REWIND, FF and 
RECORD functions of your DVD or VCR while the Control 
operates in other modes. The feature is applicable for all 
devices and brands that do not use the transport keys 
for other purposes.

Press and holding the ENTER key and then press POWER
key for 3 seconds, the LED will blink 3 times and turn off, 
default Haier codeset (001) will be programmed to the 
control.

1

Haier

001 002 003 004 005 006 007 008 009 010 240 241 297 307 355

2

Abex

077

3

Acer

267

4

Addison

333

5

Admiral

057 078 334 338

6

Advent

324

7

Adventura

079

8

Aiko

066 333

9

Aiwa

165

10

Akai

038 058 258 271 279 331 350

11

Albatron

321 325

12

Alleron

068

13

America Action

335

14

Ampro

323

15

Amtron

067

16

Anam

335

17

Anam National

059 067

18

AOC

060 061 062 222 331 349 350 353

19

Apex

092 135 151 195 339

20

Archos

308

21

Astar

259

22

Audiovox

067 189 191 207 256 333 335 337

23

Aventura

053

24

Axion

280

25

Bang & Olufsen

345 346

26

Baur

058

27

Belcor

060 349