Haier hwm120-35ff 전단
Usage of the drain hose
The drainage shall be smooth with the drain hose.
1.The height of the drain hose shall be less than 10cm , or the drainage
will not be smooth enough and cause incomplete drainage.
will not be smooth enough and cause incomplete drainage.
2.Do not step on or press the drain hose.
3.If extra drain hose is needed , the inner diameter of the extra hose
shall not less than 30mm, and the length shall not exceed1.5m.
shall not less than 30mm, and the length shall not exceed1.5m.
<10cm
> 30mm
<1.5m
Installation and adjustment
Lint filter
Overflow filter
Install the lint filter
After opening the package, please take out the lint filter from the
document bag, install it to the overflow filter of the cabinet.
See to the figure
document bag, install it to the overflow filter of the cabinet.
See to the figure
Please install and adjust the machine according to the requirement of the manual.
It is very important to your security and correct operating the machine.
It is very important to your security and correct operating the machine.
Adjust the installation position
The largest permitted slope of the bearing surface of the washing machine is 2.Slanting
or uneven groundwill cause unstable operation of the machine. Please check with follo
wing methods:
·Hang a becket with weight to confirm if the washing machine is horizontal.
or uneven groundwill cause unstable operation of the machine. Please check with follo
wing methods:
·Hang a becket with weight to confirm if the washing machine is horizontal.
Install the water inlet hose ; Select the water level
Water inlet hose
Insert the water inlet hose into the water-inleton the control panel
directly. ( pull it out to dismantle it)
Fill the water to the water level selected
according to the quantity of the laundries.
Attention:
·Do not exceed the " Maximum" water
level , otherwise the water may
overflow out of the machine.
directly. ( pull it out to dismantle it)
Fill the water to the water level selected
according to the quantity of the laundries.
Attention:
·Do not exceed the " Maximum" water
level , otherwise the water may
overflow out of the machine.
Use the quick water inlet
Maximum
（about 114L）
（about 93L）
（about 71L）
Minimum
Medium
Water level
indicator
indicator
MAX
MAX
高
高
MED
MED
中
中
N
MIN
MI
低
低
Insert the water-filling jointer into water inlet hose,
then push the water-filling jointer into the water
inlet on the control panel. (To dismantle the water
inlet hose, just push the control handle as
indicated in the figure and pull it out)
then push the water-filling jointer into the water
inlet on the control panel. (To dismantle the water
inlet hose, just push the control handle as
indicated in the figure and pull it out)
Fill water into the wash tub directly through
quick water inlet. It can reduce the humidity
inside the control panel significantly and
prolong the operating life of the components.
quick water inlet. It can reduce the humidity
inside the control panel significantly and
prolong the operating life of the components.
Quick water inlet
Water-filling jointer
Control handle
Push
Water inlet
Water inlet hose
AX
MAX
M
ED
MED
M
IN
MIN
M
Preparation before washing
1.Connect the water inlet hose.
2.Confirm that the washing machine is earthed reliably . Then insert the power
plug into the receptacle. Do not connect the earth terminal to the gas pipe and
tap water pipe.
3.Hang the drain hose up.
1.Connect the water inlet hose.
2.Confirm that the washing machine is earthed reliably . Then insert the power
plug into the receptacle. Do not connect the earth terminal to the gas pipe and
tap water pipe.
3.Hang the drain hose up.
1 Preparation before washing
The capacity of washing of the machinerefer to the largest weight of the standardlaundries under dry condition that
can be washed in one time. Laundries quantity in one washing cycle shall be lower than the rated capacity.
can be washed in one time. Laundries quantity in one washing cycle shall be lower than the rated capacity.
The thickness ,size , type of the cloth will influence the actual washing capacity. It is suitable to put in reasonable
amount oflaundries and the laundries can be turned round in washing for one time washing.
amount oflaundries and the laundries can be turned round in washing for one time washing.
Do not select " Maximum " water levelfor laundries less than 4.0kg, so as toavoid splashing of water.
2 Put in the laundries
洗涤物的参考重量
Usage of the detergent
How to use the whitener
How to use the washing powder
Fill water to decided level. Dilute
the whitener with container. Pour
it slowly into the washing tub.
the whitener with container. Pour
it slowly into the washing tub.
Avoid using whitener on laun-
dries with color or pattern as they
are prone to lose color.
dries with color or pattern as they
are prone to lose color.
The whitener shall not touch
the laundries directly.
the laundries directly.
Refer to the user's manual for
the usage and quantity of the
whitener.
the usage and quantity of the
whitener.
For powder whitener, please
dissolve it before using.
dissolve it before using.
Direct dissolved in the machine:
1.Fill small quantity of water.
2.Add the powder . Run for 30
seconds to dissolve it completely.
3.Put it in the laundries. Select suitable
water level.
1.Fill small quantity of water.
2.Add the powder . Run for 30
seconds to dissolve it completely.
3.Put it in the laundries. Select suitable
water level.
The instant dissolving of the washing
powder:
1.Prepare warm water of 30 C and a
container.
2.Add the powder while stirring to fully
dissolve it.
powder:
1.Prepare warm water of 30 C and a
container.
2.Add the powder while stirring to fully
dissolve it.
The powder is more prone to pollute the
laundries than the detergent. Therefore
please use it with proper quantity.
laundries than the detergent. Therefore
please use it with proper quantity.
Dosage of different washing powder is
different. Please refer to the instruction
of the washing powder for the detail
dosage.
different. Please refer to the instruction
of the washing powder for the detail
dosage.
How to use the washing powder
How to use the whitener
Fill water to decided level. Dilute the whitener with container. Pour it slowly into the
washing tub.
Avoid using whitener on laundries with color or pattern as they are prone to lose color.
The whitener shall not touch the laundries directly.
washing tub.
Avoid using whitener on laundries with color or pattern as they are prone to lose color.
The whitener shall not touch the laundries directly.
Direct dissolved in the machine:
1.Fill small quantity of water.
2.Add the powder . Run for 30 seconds to
dissolve it completely.
3.Put it in the laundries. Select suitable
water level.
The instant dissolving of the washing powder:
1.Prepare warm water of 30 C and a container.
2.Add the powder while stirring to fully
dissolve it.
1.Fill small quantity of water.
2.Add the powder . Run for 30 seconds to
dissolve it completely.
3.Put it in the laundries. Select suitable
water level.
The instant dissolving of the washing powder:
1.Prepare warm water of 30 C and a container.
2.Add the powder while stirring to fully
dissolve it.
The powder is more prone to pollute the
laundries than the detergent. Therefore
please use it with proper quantity.
laundries than the detergent. Therefore
please use it with proper quantity.
It is suggested not to use high sudsing
detergent.
Dosage of different washing powder is
different. Please refer to the instruction
of the washing powder for the detail
dosage.
detergent.
Dosage of different washing powder is
different. Please refer to the instruction
of the washing powder for the detail
dosage.
Refer to the user's manual for the usage and quantity of the whitener.
For powder whitener, please dissolve it before using.
For powder whitener, please dissolve it before using.
WASH TIMER
OFF
12
15
9
6
3
Please select wash time according to the laundries.
Please select water current according to the laundries.
Laundries
Wash time（minutes）
Knitwear/chemical fiber
Cotton,blending,linen
Very dirty and thick laundries
Bed sheet
Silk(thin laundries)
About2 4
~
About3~6
About7~13
About8~10
About10~13
3 Put in the detergent
5 select the wash time
4 select the wash selector
STANDARD
GENTLE
WASH SELECTOR
6 Close the top lid
7 Finish washing
8 Disposal after washing
After washing, the buzzer will ring.
Put down the drain hose
to discharge the water.
After using, please clean the lint and foreign materials of the lint filter and lint frame in time.
Otherwise it may influence your using the machine.
Please first pull off the power plug from the receptacle before cleaning.
Otherwise it may influence your using the machine.
Please first pull off the power plug from the receptacle before cleaning.
Figure 2
Figure 3
Figure 1
1. Take off the lint filter
Put hand at the indicated position.
Push down to take it off. (See to
Figure 1)
Put hand at the indicated position.
Push down to take it off. (See to
Figure 1)
2. Clean the lint
Put it in water and clean while it is still
wet.(See to Figure 2)
Put it in water and clean while it is still
wet.(See to Figure 2)
Attention: be sure not to confuse the direction.
Wipe the complete unit with soft cloth
twisted dry.
twisted dry.
Wipe with neutral detergent if too dirty.
After washing, dismount the water inlet hose.
Pull off the power plug and hang up the
power cord.
Do not store water in the tub for long period.
Discharge the water immediately after each
using.
Wipe off the water drops on the surface and
inside the tub with clean soft cloth. Open the
cover of the wash tub for some time (about
one hour), then close it.
Hang up the drain hose.
Pull off the power plug and hang up the
power cord.
Do not store water in the tub for long period.
Discharge the water immediately after each
using.
Wipe off the water drops on the surface and
inside the tub with clean soft cloth. Open the
cover of the wash tub for some time (about
one hour), then close it.
Hang up the drain hose.
Do not wash it directly by water.
3. Install the lint filter
After cleaning, insert the bottom of
the lint filter (marked with "down side")
into the filter frame, then push the
upper part of the filter in (marked with
"up side"). (See to Figure 3)
After cleaning, insert the bottom of
the lint filter (marked with "down side")
into the filter frame, then push the
upper part of the filter in (marked with
"up side"). (See to Figure 3)
* The lint filter must be used during washing.
* It must be cleaned in time after each using.
* It must be cleaned in time after each using.
Cleaning the lint filter
(To set to below 2 minute,
first set to 6 minute then
turn it back.).
first set to 6 minute then
turn it back.).
4
5
7
6