Haier ly19r1cww 사용자 가이드

(If connected to S-Video,select the S-Video external input source.)

3. Refer the DVD player's manual for operating instructions.
Component Input ports
To get better picture quality, connect a DVD player to the component
input ports as shown below.

Connection and use steps:
1.Read the user guide supplied with your AV devices and ensure that it has 
   S-Video connectors;
2.Make sure that the power of the LCD-TV and the AV device are switched off;

.Turn on the power of the LCD-TV first ; 

   and then turn on the power of the AV
   device;
4.Set the video input mode of the LCD-TV 
   to S-Video mode .

Connection Option 1
Set VCR output switch to 3 or 4 and then 
tune TV to the same channel number.

Connection Option 2
1. Connect the audio and S-Video cables 
    from the VCR's output jacks to the TV 
    input jacks, as shown in the figure.
2. Insert a video tape into the VCR and 
    press PLAY on the VCR. (Refer to the 
    VCR owner

s manual.)

3

- To avoid picture noise (interference), leave an adequate distance between the
   VCR and TV

.

1

2