Haier ly19r1cww 사용자 가이드

Data Side

Basic Playback

1. Place the DVD in the disc slot as figure above. 
The disc will be loaded automatically after one to 
two seconds, then the DVD player reads the DVD 
and displays the opening menu.

If there is no 

disc placed on the disc slot  in DVD mode, OPEN 
will display on the screen all the times)
        There is only one disc size can be loaded in 
        the disc slot . 
        Do not place  a disc which is unplayable  in 
        this DVD player.
        Some disc may not  playback  automatically,
        you  can  press PLAY button to start
        playback.
2. Some  disc  may start  playback  with  a menu, 
    use  the  cursor button on the remote control to 
    select  menu  options  and press PLAY
    to start,  or  press  digits  to  select  a  menu
    options directly.

1. Press PAUSE/STEP  to pause playback (still 
mode). The sound will be muted during still mode.
2. Press PLAY/ENTER to resume normal playback.

1. Press STOP      button to go to stop mode, the 

TV screen will show the start-up logo. For some 
disc the player can recall the location where 
stopped, such as DVDs and audio CDs.

2. Press PLAY to resume  playback from the 

location where playback is stopped.

3. Press STOP twice to stop completely.

During playback, press PREV       key can go 

back to the beginning of this chapter, then each 
press of this key will skip a chapter till the start of 
the disc. (note: Disc function may vary 
depending on disc format)
Each press of NEXT        key during playback will 
skip the current chapter and play the next one.

1. Press FWD        to fast forward through the disc. 

Each time the FWD      button is pressed, the fast 
forward motion speed changes. It would cycle 
through 2X, 4X, 8X, 16X, 32X and normal.

2. Press PLAY to resume normal playback.
3. Press REV         to fast reverse through the disc. 

Each time the REV       button is pressed, the fast 
reverse motion speed changes. It would cycle 
through 2X, 4X, 8X, 16X, 32X and normal.

4. Press PLAY to resume normal playback.

1. Press the PAUSE/STEP button to pause the 

playback.

2. To view the next frame, press the PAUSE/STEP

button. Each press of the PAUSE/STEP button 
advances the film by one frame.

Operate the remote to set the TV to DVD status

.

Note: The unit do not allow enter DVD mode again
(or place a DVD in the disc slot)after it have just left 
to avoid any damage of the DVD. Wait for 10 seconds 
to enter again. 

Press this button can zoom enlarge or lessen the picture. 

Each time pressed the picture times will be change.

When pressing the D.CALL button repeatedly
different OSD indicator will be displayed for
different types of disc DVD, CD etc

In zoom mode press navigation buttons to move
the picture displayed on the screen