Haier ph-4210d 사용자 설명서

Time Setup

If  Off-time or On-time is intended in AV1/S-Video/YPbPr/YCbCr/VGA , follow the instructions as below:

Clock                       11:30 AM

Off Time                   08:30 PM

On Time                   05:30 PM

On CH                         000

Remind Time           07:00 PM

Remind CH                 000

B

C

A

Indication will appear on the screen 1 minute prior to 
the shut down of the set 

Off Time

Time Setup

If Clock is set, the time you set for Off Time and On Time will be a point 

of time, Otherwise, if Clock is not set, the time you set for Off Time and 

On Time will be a period of time.

The Sleep Time and Off Time can not be set as simultaneously . 
If both time are set , the later setup will be in operation.

The clock will only work if the TV set is  turned on or in standby. 
When the set is disconnect from the power supply or is turned off by 
the main power on the rear panel, the clock loses power and will need 
to be reset when the power is reconnected.

1

 

Press MENU button and then VOL+/- button to select the TIME menu.

2 

Press CH+/- button to select "Clock",press VOL +/- button to select hour 

or minute position, then press the digital buttons to set the value of hour or minute. 

Using on/off time function, the TV set can automatically turn on to a preset channel or shut down at a preset time. 

1

 

Press CH+/- button to select  "On Time",

 

press VOL+/-button to select hour or minute position; then press the digit 

buttons to set the value of both hours or minutes.

2

 

Press CH+/- button to select  "On CH", then press the digit  buttons to select your desired channel.

3

 

Repeat step 1-2 to set "Off Time".

1

 Press MENU and then VOL+/- button to call up the TIME menu on the screen.

2

 Press CH+/- button to select  "Remind Time", then press VOL+/- button to select hour or minute position; 

then press the digit buttons to set the value of hour or minute.

3

 Press CH+/- button to move the cursor to "Remind CH". 

Then press the digit buttons to set the desired channel.