Haier ph-4210d 사용자 설명서

- RGB (PC) mode only; This function doesn`t work  in RGB-DTV mode.
- Automatically adjusts picture position and minimizes image shaking.
- After adjustment, if the image is still not correct, your TV may need further adjustment.
- The Auto sync

 is

 not active in 

ode.

HDMI m

1

. Press MENU  button and then use VOL+/- button to select the ADJ.

Menu.

2

. Press CH+/-

 

button to select Auto Sync

3

. Press VOL+/- button to run Auto Sync.

 When Auto Sync

 

has finished, a better quality image should be shown on screen.

 If the position of the image is still not correct, try Auto adjustment again.

4

. In RGB (PC) mode, if the image needs to be adjusted more after using 

Auto

    Sync

, you can try Auto Sync again.

Note

: Use Reset instead of Auto sync in 480P,720P,1080i.

Press the ARC  button repeatedly to select the desired picture format. 

   

 4:3 mode

      Choose 4:3 mode  when you want to view a picture with an original 4:3 aspect ratio, with black bars appearing at both the
     left and right sides.
   
   

 Full screen( correspond with 16:9)

      Choose Full screen  when you want to adjust the picture horizontally, in a linear proportion to fill the entire screen.
   
   

      Choose  Vertical Zoom  when you want to adjust the picture the picture vertically, that is without any back bars.
   
   
Note:
The setting of aspect ratio is respective of each different signal source , that means different aspect ratios can be saved
for each different source

- Caution: If a 4:3 or one to one fixed image is on the screen for a long time, it may remain visible. This is called burn-in.
- Set every aspect ratio for Video, Component 480i sources.
- Use 4:3, or 16:9 for other RGB-PC and 

-PC sources.

- Horizon is not available for Component (480p,720p,1080i), DTV (480p,720p,1080i) sources.

HDMI

- This function works in the following modes:
RGB-PC, RGB-DTV (480p,720p,1080i), 

-DTV (480p,720p,1080i), COMPONENT(480p,720p,1080i).

1. Press MENU  button and then use VOL+/- button to select the ADJ. Menu.
2. Press CH+/- button to select Adjust.
3. Press VOL+/- button or enter button to enter the sub menu.
4. Press CH+/- button to select one option and then press VOL+/- to adjust.
5. Press MENU or EXIT to exit it.

HDMI

Display Mode         Full screen

Reset

Color Temper.          Standard

Black Stretch               On

Adjust                       

RGB                          

Auto Sync

.

B

C

A