Haier ph-4210d 사용자 설명서

Connect the audio and video cables from the external
equipment's output jacks to the TV`s AV IN input jacks, as shown in
the figure.
When connecting the TV to external equipment, match the
jack colors (Video = yellow, Audio Left = white, and Audio
Right = red).

1.

 Select the input source by using the INPUT  button on

the remote control.

2

. Operate the corresponding external equipment. Refer to

external equipment operating guide.

 

 

1

. Connect the DVD video outputs (Y, Pb, Pr) to the COMPONENT

(Y, Pb, Pr) IN jacks on the 

and connect the DVD 

audio outputs to the AUDIO INPUT jacks on the 

, as 

shown in the figure.

2.

 If your DVD only has an S-Video output jack, connect this to the

S-VIDEO input on the and connect the DVD audio
outputs to the AUDIO INPUT jacks on the 

, as shown 

in the figure.

:  If your DVD player does not have component video output,

use S-Video 

 .

1. Turn on the DVD player, insert a DVD.
2. Use the INPUT  button on the remote control
to select YPbPr/YCbCr  . (If connected to S-VIDEO,
select the AV1/S-VIDEO external input source.)
3. Refer to the DVD player's manual for operating instructions.

 

To get better picture quality, connect a DVD player to the component
input ports as shown below.

TV

TV

TV

 

or composite(AV)

Video output ports
on DVD player

Component ports
on the TV