Haier ph-4210d 사용자 설명서

  Check whether the TV is turned on from both front button and 

the back switch.

  Is the power cord inserted into wall power outlet?

  Test the wall power outlet, plug another product`s power cord into the 

outlet where the TV`s power cord was plugged in.

No picture &
No sound

 Press the VOL+ button.

 Is the sound muted? Press MUTE button.

Picture OK &
No sound

 Check to see if there is any object between the TV and the remote 

control causing obstruction.

 Are batteries installed with correct polarity (+ to +, - to -)?(Refer to p.8)

 Correct remote operating mode set: VCR, etc.?

 Install new batteries. (Refer to p.8)

The remote control
doesn`s  work

 This is normal, the image is muted during the display startup process. Please

contact your service center, if the picture has not appeared after five minutes.

Picture appears slowly
after switching on

 Select 

Color Temperature 

in the ADJ

 

menu and press the VOL+/- button.

 Keep a sufficient distance between the TV and the VCR.

 Activate any function to restore the brightness of the picture.

No or poor color
or poor picture

 Check for local interference such as an electrical appliance or power tool.

Horizontal/vertical bars
or picture shaking

 Adjust 

Balance 

in the 

SOU. 

menu. (Refer to p.21)

No output from one of
the speakers

 A change in ambient humidity or temperature may result in an unusual noise

when the plasma display is turned on or off and does not indicate a fault with it..

Unusual sound from
inside the TV