Citiwell ng65fs 사용자 매뉴얼

SETUP: 
 
 

             
 

1

3

5

Q

6

7

L

 
 
 
 

 

2

 

 

 

 

4

 
 
 

 
 
 

 
 
 
 

TB

Q

1)  Remove the quick release shoe (Q) from the tripod by pulling outward on the 

lever (L). Position the telescope and the tripod so that the ¼” x 20 tripod bolt (TB) 
is aligned with the tripod socket underneath the telescope tube (1). Hand-tighten 
the tripod bolt by turning it clockwise. Do not over-tighten. 

 

2)  Place the quick release shoe (with the telescope attached) onto the tripod as 

shown below. You will have to hold the lever (L) out while you position the 
telescope. When the telescope is securely positioned push the lever (L) firmly 
inward. 

 

 

 

L

 
 
 
 
 
 
 
3)  Spread the three tripod legs and set the unit down on a level surface. 

 

4)  You can adjust the height of the telescope with the leg locks (2) located 

approximately half way down each leg. 

 
 

3