Nikon S560 사용자 가이드

다운로드
페이지 172
19
Inserting Memory Cards
First Ste
p
s
Removing Memory Cards
Before removing memory cards, turn the camera off 
and confirm that the power-on lamp and the monitor 
are off. Open the battery-chamber/memory card slot 
cover and press the card in 1 to partially eject the card 
2. The card can then be removed by hand.
B
Formatting Memory Cards
If the message at right is displayed, the memory card must be 
formatted before use (
A 126). Note that formatting permanently 
deletes all pictures and other data on the memory card. Be sure 
to make copies of any pictures you wish to keep before formatting 
the memory card.
Use the multi selector to choose Yes and press 
k. The 
confirmation dialog will be displayed. To start formatting, choose 
Format and press 
k.
• Do not turn the camera off or open the battery-chamber/memory card slot cover until 
formatting is complete. 
• The first time you insert the memory cards used in other devices into the COOLPIX S560, be sure to 
format them using this camera (
B
The Write Protect Switch
SD memory cards are equipped with a write protect switch. 
Pictures cannot be recorded or deleted and the memory card 
cannot be formatted when this switch is in the “lock” position. 
Unlock by sliding the switch to the “write” position.
B
Memory Cards
• Use only Secure Digital memory cards.
• Do not perform the following during formatting, while data 
is being written to or deleted from the memory card, or during data transfer to a computer. Failure 
to observe this precaution could result in the loss of data or in damage to the camera or memory 
card:
- Take out the battery or memory card
- Turn  off  the  camera
- Disconnect the AC adapter
• Do not format the memory card using a computer.
• Do not disassemble or modify.
• Do not drop, bend, or expose to water or strong physical shocks.
• Do not touch the metal terminals with your fingers or metal objects.
• Do not affix labels or stickers to the memory card.
• Do not leave in direct sunlight, closed vehicles or areas exposed to high temperatures.
• Do not expose to humidity, dust, or to corrosive gases.
Card is not formatted.
Format card?
No
Yes
Write protect switch