Frigidaire FMB330RG 설치 설명서

3

Figure C

Figure D

Install waste tee or disposer and air gap according to

manufacturer’s instructions.

• Drill a 1-1/2” dia. hole in the cabinet wall within the shaded

areas shown in Figure A for the drain hose connection. The hole

should be smooth with no sharp edges.

Provide a method to attach drain hose to underside of countertop.

Cabinets

Square

and

Plumb

32.5"

Underside of

Countertop

to Floor

24" 

Min.

17-5/8" Min.

18" Max.

4"

6"

Clearance for Door

Opening 2" Minimum

Countertop

Dishwasher

25-5/8"

18"

Min.

32"

Min.

32"

Min.

18"

Min.

Figure A

• The rough cabinet opening must be at least 24” deep and

17-5/8” to 18” wide. The opening should be 32.5” max. height.

     When

installed into a corner,

allow 2” min. clearance

between dishwasher and

adjacent cabinet, wall or

other appliances. Allow

25-5/8" min. clearance

from the front of the

dishwasher for door

opening. Figure B

 ADA installation, (32-1/2”) beneath 34” high counter-tops may be

accomplished by adjusting the toekick and leveling legs.

Figure B

• Follow local codes and ordinances.

• Do not exceed 10 feet distance to drain.

• Do not connect drain lines from other devices to the

dishwasher drain hose.

• Dishwasher must be connected to waste line with an air gap

(not supplied) or 32" minimum high drain loop, depending on

local codes and ordinances to prevent back flow into the

dishwasher.

• Air gap must be used if waste tee or disposer connection is

less than 18" above the floor to prevent siphoning.

The type of drain installation depends on answers to the

following questions:

…

Do local codes or ordinances require an air gap?

…

Will waste tee or disposer connection be less than 18"

above the floor?

…

Will installation have a drain loop less than 32" above floor?

If the answer to ANY of the 3 questions above is YES,
Method 1 MUST be used

. Otherwise either Method 1 or

Method 2 may be used. Figure C or Figure D.

An air gap MUST BE USED if the drain hose is connected to

waste tee or disposer lower than 18" above the floor.
Failure to provide the proper drain connection height with air gap

or 32" minimum, high drain loop will result in improper draining

of the dishwasher.

• The dishwasher must be installed so that drain hose is no more

than 10 feet in length for proper drainage.

• The dishwasher must be fully enclosed on the top, sides and

back, and must not support any part of the enclosure.