Frigidaire FFET2725L 사용자 설명서

9



Both ovens will be changed at the same time.



If “F” appears, the display is set to show temperatures 

in Fahrenheit. If “c” appears, the display is set to show 

temperatures in Celsius.



“12h” in the display indicates the control is set for the 

12 hour Energy Saving mode and “- -h” indicates the 

control is set for the Continuous Bake feature.

The Broil pad controls the Fahrenheit or Celsius 

temperature display modes. The oven control can be 

programmed to display temperatures in Fahrenheit or 

Celsius. The oven has been preset at the factory to 

display in Fahrenheit.

1. Press Broil pad and hold for 6 seconds. A beep will 

sound, “---” will appear “uPPer” and “Broil” will 

flash in the display. After 6 seconds a beep will be 

heard and “F” or “c” will appear in the display.

2. Press up or down arrow pad to switch between 

Fahrenheit or Celsius display modes. The display will 

show either “F” or “c”.

3. Press start pad or wait 5 seconds to accept the 

change. Press clear off pad to reject the change.

The  clock  pad  is  used  to  set  the  clock.  The  clock  may 

be set for 12 or 24 hour time of day operation. The clock 

has been preset at the factory for the 12 hour operation. 

When the wall oven is first plugged in, or when the power 

supply to the appliance has been interrupted, the timer in 

the display will flash. Some models will also display “PF” 

(power failure).

When PF appears in the display or when 12:00 is flashing, 

press clear off pad.

1. Press clock pad. “clo” and the current time of day 

will appear in the display.

2. Press up or down arrow pad to set the correct time 

of day. Press start pad. The new time of day will 

appear in the display.

1. Press and hold clock pad for 6 seconds. “clo” and the 

current time of day will appear in the display. A beep will 

sound and “12h” or “24h” will appear in the display.

2. Press up or down arrow pad to switch between the 

12 and 24 hour time of day display. The display will 

show either “12h” or “24h”.

3. Press start pad or wait 5 seconds to accept the 

change. Press clear off pad to reject the change.

4. Reset the correct time as described in To set the Clock 

above. Please note that if the 24 hour time of day 

mode was chosen, the clock will now display time from 

0:00 through 23:59 hours.

The Timer on•off and clean pads control the 

Continuous Bake or 12 hour Energy Saving Features. The 

oven control has a factory preset built-in 12 hour Energy 

Saving feature that will shut off the oven if the oven 

control is left on for more than 11 hours and 59 minutes. 

The oven can be programmed to override this feature for 

Continuous Baking.

1. Press and hold Timer on•off pad for 6 seconds. After 

6 seconds “12h” or “- -h” will appear in the display 

and the control will beep once.

2. Press up or down arrow pad to switch between the 

12 hour Energy Saving and continuous bake features. 

3. Press start pad or wait 5 seconds to accept the 

change (display will return to time of day). Press clear 

off pad to reject the change.

The Timer on•off pad controls the Timer feature. The 

Timer serves as an extra timer in the kitchen that will 

beep when the set time has run out. It does not start or 

stop cooking. The Timer feature can be used during any 

of the other oven control functions, except during a self 

clean operation.

1. Press Timer on•off pad. “-- --” will appear and 

“timer” will flash in the display.

2. Press up or down arrow pad to set the desired time 

in the display. Press start pad or wait 5 seconds. The 

time will begin to countdown with the set time and 

“timer” will stay in the display. 

3. When the set time has run out, “end” and “timer” 

will show in the display. The clock will sound with 3 

beeps every 7 seconds until Timer on•off pad is 

pressed.

has run out: Press Timer on•off pad. The display will 

return to the time of day.