Frigidaire FGES3045K 사용자 가이드

39

Be sure the oven is unplugged and all parts are COOL 

before replacing the oven light bulb. Do not turn 

the oven light on during a self-cleaning cycle. High 

temperature will reduce lamp life.

Oven door

Around

Hinge

Most oven 

doors contain glass that can break. 

Read the following recommendations:

1.  Do not close the oven door until all the oven racks are 

fully in place.

2.  Do not hit the glass with pots, pans, or any other ob-

ject.

3.  Scratching, hitting, jarring or stressing the glass may 

weaken its structure causing an increased risk of 

breakage at a later time.

On some models an interior oven light will turn on 

automatically when the oven is opened. The oven light 

may be turned on when the door is closed by using the 

oven light switch located on the Electronic Oven control. 

The oven light bulb is covered with a glass shield held 

in place by a wire holder. THIS GLASS SHIELD MUST 

ALWAYS BE IN PLACE WHEN THE OVEN IS IN USE.

To Replace the Light Bulb:
1.  Turn the power off at the main source.

2.  Wear a leather-faced glove for protection against 

possible broken glass.

3.  Replace bulb with a 40 Watt appliance bulb only.

4.  For self-cleaning oven, press wire holder to one side 

to release glass shield, change bulb and be sure to 

replace glass shield.

1.  In order to remove the “hidden bake” cover, pull the 

back edge with one hand about 1/2” inch and lift 

up the “hidden bake” cover with both hands (See 

picture).

2.  When reinstalling the “hidden bake” cover, be sure to 

put it all the way to the back of the oven and lay it 

down on the 2 shoulder screws. Then push the front 

edge of the cover in its place below the front bracket.

To have easier access to the “hidden bake” cover, you can 

remove the oven door by following the instructions on 

previous page.

IMPORTANT: Always replace the “hidden bake” cover 

before the next use.