Microtek mv320 사용자 가이드

A Secure Digital (SD) card can be used to increase the

DV camera’s memory capacity. When a card is

installed, video/audio clips and still images are stored

directly onto the SD card. If a card is not installed,

video/audio clips and still images are stored in the DV

camera’s internal memory.

To install an SD card:
1. Ensure that the DV camera

is turned off; then open the

SD card compartment

cover on the base of the DV

camera.

If your DV camera is supplied with an AC adapter (5V,

2A), when connected using the AC adapter, the DV

camera can function as a charger, allowing you to

charge the Lithium ion battery or power the DV camera.

Charger LED

1. Plug the AC adapter into the

power source.

2. Ensure that the DV camera

is turned off; then connect

the DC plug of the AC

adapter to the DV camera’s

DC-in connector.

When the DV camera is

connected, the battery starts

to charge, and the charger

LED (Audio mode indicator)

lights up red. After charging

for several hours, the red light

disappears, indicating that the

battery is fully charged.

2 Insert and push the SD card

into the compartment until

you hear a “click”.

Ensure that the orientation of

the SD card matches the SD

card marking in the SD

compartment.

3. Close the SD card

compartment cover

securely.

*SD card is optional and is not

included with your purchase.

• Use only the AC adapter

supplied with the DV camera to

charge the Lithium ion battery

(Nokia 8210 compatible only).

Using any other adapter may

damage the DV camera.

• To minimize the risk of fire and/or explosion, do not use

the AC adapter to charge alkaline batteries.