Microtek mv320 사용자 가이드

The DV camera provides some manual settings that

enable you to customize the functions of the DV camera

for your specific needs. Use the Setup menu to set the

various setting for your DV camera. The Setup menu

can be accessed from any mode except Audio mode,

and is always the same.
To access the Setup menu:
1. Press the MODE button to

select  ,  , or   mode.

2. Press the MENU button.
3. Use the   arrow button to

enter the Setup menu ( ).

4. Use the  /  button to navigate

through the available functions

for the DV camera.

Read this section carefully before making any changes.

If you make a mistake and do not know how to

correct it, you may have to reset all settings to the

factory default.

Use this function to adjust the brightness level of the

LCD screen. There are five levels of brightness to

select from.

When the Beep function is turned on, the DV camera

will produce a beeping sound to indicate that some

function has been carried out. The DV camera makes

no beeping sound when this function is set to off.

Use this function to set the date for the DV camera.

Configure the date setting using the  /  button.

Use this function to set the time for the DV camera.

Configure the time settings using the  /  button.

Use this function to mark the date stamp on each image

you take. The date stamp for a print is permanently

shown in yellow on the right corner of the image.

Use this function to define the type of TV format on

which the DV camera’s images will be displayed. You

can set the video output to either PAL or NTSC format.

NTSC is used in North America and parts of Asia, while

PAL is used in Europe. If you are unsure about your TV

system, consult the documentation that came with it.