Microtek CX6 빠른 설정 가이드

Warning:   
As a safety precaution, disconnect all 
power to the projector and connecting 
devices before making connections. 

DVI-I in 

Connect the supplied DVI 
cable from a computer. 

RGB in 

Connect an RGB cable 
from a computer (not sup-
plied). 

RGB 
out 

Connect an RGB cable (not 
supplied) to an external 
monitor. 

RS-232 

Reserved service port for 
firmware upgrades. 

USB 

Connect the supplied USB 
cable from a computer. 

Audio-
in 

Connect an audio cable 
(not supplied) from the 
computer’s audio-out con-
nector. 

Audio-
out 

Connect an audio cable 
(not supplied) to audio-in 
port of a amplifier device 

L-
Audio-
R 

Connect an audio cable 
(not supplied) from a video 
device. 

Video 
in 

Connect a composite video 
cable (not supplied) from a 
video device. 

10.  S-video 

Connect the supplied S-
video cable from a video 
device. 

Compo-
nent  
Video in 

Connect a component video 
cable (not supplied) from a 
video device. 

1. 

Connect the power cord to the 
projector (A). Connect the other 
end to a wall outlet.  
Turn the main power switch on 
(B). 
The Power LED and Lamp-ready 
LED turn on. 

2. 

Turn on the connected devices. 

3. 

Ensure the Lamp-ready LED is 
orange (not flashing) and then 
press the Power button to turn 
on the projector (B).  
The projector splash screen 
displays and connected devices 
are detected. 

4. 

Press the Menu button and then 
press the cursor 

 button until 

Language is highlighted (C). 

5. 

Press the cursor 

 button until 

the language you want is 
highlighted (D). 

6. 

Press the cursor  ENTER button 
to confirm the language. 

7. 

Press the Menu button twice to 
close the OSD. 

8. 

To turn off the projector, press 
the power button once and then 
again after the prompt. Then, 
turn off the main power switch.