Clover cdr-1610 사용자 설명서
2.1 General Information
You can operate all functions of the system by use of the 26 buttons located on the front
panel and a mouse. Also you can remotely control this unit via RS-485 or the Ethernet
port located on the backside.
System status is indicated by either LED light on the operator buttons or the monitor.
The system is protected from any inadvertent pressing of any operator buttons. But care
should be taken when using the functions of HDD Formatting as then can lead to data
loss. To avoid any mistake, the re-confirmation is required when these functions are
selected.
2.2 Power On/Off
▪ Power On: Push the “POWER” button in the front panel for 5 seconds.
▪ Power Off: Push the “POWER” button in the front panel for 5 seconds or click the
mouse’s right button on the power off screen.
Figure 2-1: Power off
- 14 -