Clover cdr-1610 사용자 설명서
3.6 Record Configuration
▪ Click “STOP RECORD” in the MAIN menu before setting the Record Configuration.
▪ Click the “RECORD CFG” button on the Setup Window, it will show the Record
Configuration Window.
▪ Click the “EXIT” button on the Record Configuration Window, it will return to the Setup
Window.
Figure 3-28: Record Configuration Window
NOTE: RECORDING CONFIGURATION IS ONLY AVAILABLE IN THE “STOP
RECORD” MODE. IF THE SYSTEM IS ON “RECORDING MODE”, YOU
SHOULD CHANGE TO “STOP RECORD” FOR RECORDING
CONFIGURATION.
SHOULD CHANGE TO “STOP RECORD” FOR RECORDING
CONFIGURATION.
■
Emergency Record Mode Setting
▪ By pressing the “Emergency Record” button (Figure 1-3: Function Button ②) the front
panel, you can record instantly.
Figure 3-29: Emergency Record Mode Setting
[Quality]
▪ It enables you to set the recorded image quality on Emergency Record mode.
▪ It is selectable from 1 to 30 grades.
▪ It enables you to set the recorded image quality on Emergency Record mode.
▪ It is selectable from 1 to 30 grades.
[Camera Set]
▪ It enables you to set the recording frame rate for each camera on Emergency Record
▪ It enables you to set the recording frame rate for each camera on Emergency Record
mode.
- 45 -