Clover cdr-1610 사용자 설명서
3.7 Motion Configuration
▪ Click the “MOTION CFG” button on the Setup Window, it will show the Motion
Configuration Window.
▪ Click the “EXIT” button on the Motion Configuration Window, it will return to the Setup
Window.
Figure 3-37: Motion Configuration Window
NOTE: MOTION CONFIGURATION IS ONLY AVAILABLE IN THE “STOP
RECORD” MODE. IF THE SYSTEM IS ON “RECORDING MODE”, YOU
SHOULD CHANGE TO “STOP RECORD” FOR MOTION
CONFIGURATION.
SHOULD CHANGE TO “STOP RECORD” FOR MOTION
CONFIGURATION.
■
Active
▪ It enables you to turn on/off the motion detection.
▪ You can select “ON” or “OFF” by using the mouse wheel or “UP/DOWN” key on the front
panel.
▪ To set the all of camera’s motion detection “ON” or “OFF”, click the “A” button.
Figure 3-38: Motion Detection On/Off Setting
■
Buzzer On/Off
▪ It enables you to beep the buzzer when the motion is detected.
▪ To set the all of buzzer “ON” or “OFF”, click the “A” button.
Figure 3-39: Buzzer On/Off Setting
- 51 -