Clover cdr-1610 사용자 설명서
3.9 Network Configuration
▪ Click the “NETWORK CFG” button on the Setup Window, it will show the Network
Configuration Window.
▪ Click the “EXIT” button on the Network Configuration Window, it will return to the Setup
Window.
Figure 3-54: Network Configuration Window
■
IP Mode
▪ There are two types of IP mode, Dynamic IP and Static IP mode.
- DYNAMIC IP: It is automatically received IP address from the Router or Gateway.
With Dynamic IP mode, you do not need to input the Gateway Address,
Subnet Mask, and IP Address Number.
Subnet Mask, and IP Address Number.
- STATIC IP : Using the Static IP, it needs to Gateway Address, Subnet Mask, and IP
Address Number for network setting.
▪ Click the “IP MODE” button, and select the IP mode by mouse wheel or “UP/DOWN” key
on the front panel and click the button again to confirm.
▪ If you select the “DYNAMIC IP”, it will work after received IP address from the Router
and display on the IP address.
■
Gateway / Subnet Mask/ IP Address
▪ Click the “GATEWAY / SUBNET / IP ADDRESS” button, it will show On Screen
Keyboard.
▪ Enter the address number by using On Screen Keyboard, and then click “OK” button to
set with new address.
▪ Click the “CANCEL” button to return to the origin value.
■
Port Number
▪ Port is the address of TCP and network viewer. It can be set from 1 to 65535 values.
▪ Click the “PORT” button, it will show On Screen Keyboard.
▪ Enter the port number by using On Screen Keyboard, and then click “OK” button to set
with new port number.
▪ Click the “CANCEL” button to return to the origin value.
- 57 -