Nortel 4526T-PWR 사용자 가이드
118
Chapter 3 Configuring Quality of Service (QoS) with the Web-based Management Interface
Field
Description
Set Egress Unicast
Choose either:
•
Ignore - the system does not set an egress
unicast port
unicast port
•
Choose the port for the egress unicasts.
The default setting is Ignore.
Set Egress
Non-Unicast
Non-Unicast
Choose either:
•
Ignore - the system does not set an egress
unicast port
unicast port
•
Choose the port for the egress non-unicasts.
The default setting is Ignore.
Session ID
Specify the session ID.
3
Click Submit.
—End—
ATTENTION
In order to use an interface action extension, you should select both fields (set
egress unicast and set egress non-unicast). Same port should be used for both
unicast and non-unicast packets.
egress unicast and set egress non-unicast). Same port should be used for both
unicast and non-unicast packets.
Deleting an interface action extension configuration
To delete an interface action extension, complete these tasks:
Step
Action
1
Open the Interface Action Extension screen by selecting
Applications > QoS > QoS Advanced > Interface Action Ext.
This screen is illustrated in Interface Action Extension screen.
Applications > QoS > QoS Advanced > Interface Action Ext.
This screen is illustrated in Interface Action Extension screen.
2
In the Interface Action Extension Table section, click the Delete
icon in the row of the action extension to be deleted.
icon in the row of the action extension to be deleted.
Nortel Ethernet Routing Switch 4500 Series
Configuration — Quality of Service
NN47205-504 (322816-
B
)
03.01
Standard
5.1
23 November 2007
Copyright © 2007, Nortel Networks
.