Nortel 4134 빠른 설정 가이드
34
Installing the Secure Router 4134 chassis and hardware components
Installing a Small Module
Use the procedure in this section to install a Small Module in the Secure
Router 4134. You can install Small Modules in slots 1, 2, 3, and 4.
Router 4134. You can install Small Modules in slots 1, 2, 3, and 4.
Procedure steps
Step
Action
1
Use a Phillips screwdriver to remove the slot cover plate from the
slot in which you will install the module.
slot in which you will install the module.
2
Align the module with the slot and the slot module guides.
3
Slide the module into the chassis until its connector panel touches
the chassis back panel.
the chassis back panel.
4
Push gently, but firmly, to seat the connector on the interface module
in the chassis back panel.
in the chassis back panel.
5
Use a Phillips screwdriver to tighten the two captive screws to secure
the module to the chassis.
the module to the chassis.
—End—
Installing a Medium Module
Use the procedure in this section to install a Medium Module in the Secure
Router 4134. You can install Medium Modules in slots 5, 6, and 7.
Router 4134. You can install Medium Modules in slots 5, 6, and 7.
Procedure steps
Step
Action
1
Use a Phillips screwdriver to remove the slot cover plate from the
slot in which you will install the module.
slot in which you will install the module.
2
Align the module with the slot and the slot module guides.
3
Slide the module into the chassis until its connector panel touches
the chassis back panel.
the chassis back panel.
4
Push gently, but firmly, to seat the connector on the interface module
in the chassis back panel.
in the chassis back panel.
5
Ensure the lever on the module is flush with the front panel of the
Secure Router 4134.
Secure Router 4134.
6
Use a Phillips screwdriver to tighten the two captive screws to secure
the module to the chassis.
the module to the chassis.
Nortel Secure Router 4134
Quick Start
NN47263-100
01.01
Standard
10.0
16 July 2007
Copyright © 2007, Nortel Networks
.