Nortel 4134 사용자 가이드
186
GRE and IPIP tunnel configuration
Table 93
Variable definitions
Variable definitions
Variable
Value
<0-4294967295>
Specifies the key value.
Configuring tunnel sequencing
Configure sequencing to enable dropping of out-of-order packets on the
tunnel.
tunnel.
The default mode for this feature is disabled. This feature is available only in
the GRE mode.
the GRE mode.
Procedure steps
Step
Action
1
To enter configuration mode, enter:
configure terminal
2
To specify the name of the tunnel to configure, enter:
interface tunnel <tunnel-name>
3
To configure tunnel sequence, enter:
[no] tunnel sequence
—End—
Configuring tunnel parameters
Configuring path MTU discovery for tunnel packets
Enable or disable path MTU discovery on the tunnel. The default mode
for this feature is disabled.
for this feature is disabled.
Procedure steps
Step
Action
1
To enter configuration mode, enter:
configure terminal
2
To specify the name of the tunnel to configure, enter:
interface tunnel <tunnel-name>
3
To enable or disable path MTU discovery, enter:
Nortel Secure Router 4134
Security — Configuration and Management
NN47263-600
01.02
Standard
10.0
3 August 2007
Copyright © 2007, Nortel Networks
.