Nortel 4134 사용자 가이드
254
Configuration examples
•
If both “ip mtu” and “tunnel path-mtu-discovery” are configured and
enabled on the SR4134, the MTU value set by “ip mtu” configuration
takes effect.
enabled on the SR4134, the MTU value set by “ip mtu” configuration
takes effect.
Secure router configuration for BGP
Configure SR4134 for BGP as follows:
Step
Action
1
To configure an Ethernet interface for source traffic, enter:
interface ethernet 6/12
ip address 10.10.10.1 24
crypto trusted
exit
2
To configure an Ethernet interface as a tunnel source interface, enter:
interface ethernet 0/1
ip address 192.168.26.100 24
crypto untrusted
exit
3
To configure the tunnel interface, enter:
interface tunnel toCes
tunnel mode ipip
ip address 100.1.1.1 24
tunnel source 192.168.26.100
tunnel destination 192.168.27.100
tunnel protection toCes Nortel
crypto untrusted
exit
4
To redistribute the tunnel route into OSPF, enter:
router ospf
redistribute connected
exit
5
To configure a loopback interface, enter:
interface loopback ll1
ip address 50.1.1.1 24
exit
6
To configure BGP, enter:
router bgp 100
neighbor 50.1.1.10 update-source 50.1.1.1
exit
exit
7
To configure the IP route, enter:
Nortel Secure Router 4134
Security — Configuration and Management
NN47263-600
01.02
Standard
10.0
3 August 2007
Copyright © 2007, Nortel Networks
.