Nortel 2350 사용자 가이드
576 Managing 802.1X on the WSS
NN47250-500 (320657-F Version 02.01)
Enabling 802.1X key transmission
The following command enables or disables the transmission of key information to the supplicant (client) in EAPoL key
messages, after authentication:
messages, after authentication:
set dot1x key-tx {enable | disable}
Key transmission is enabled by default.
The WSS sends EAPoL key messages after successfully authenticating the supplicant (client) and receiving authoriza-
tion attributes for the client. If the client is using dynamic WEP, the EAPoL Key messages are sent immediately after
authorization.
tion attributes for the client. If the client is using dynamic WEP, the EAPoL Key messages are sent immediately after
authorization.
Type the following command to reenable key transmission:
WSS# set dot1x key-tx enable
success: dot1x key transmission enabled.
success: dot1x key transmission enabled.