Nortel 15000 사용자 가이드
Managing the Versalar 15000
302768-C Rev 00
5-15
If the operation fails, the console displays a message describing the cause of
the failure.
the failure.
Viewing the Load Address and Size of an Application
The
loadmap
command allows you to view the load address and size of each
dynamically loadable application.
To view the addresses and sizes of the applications located on a specified slot or
slots, enter the
slots, enter the
loadmap
command with one or more of the following optional
parameters:
loadmap
[
<slot_no.>
] [
<file_name>
]
loadmap
[
<slot_no.>
-
<slot_no.>
] [
<file_name>
]
slot_no.
is the number of the slot where the applications are located. (You can also
enter the keyword
all
to view the applications for all slots.)
file_name
is the name of the file to which you want to direct the output.
Examples
prom -v 9:sspdiag.ppc 10
Verifies the contents of the diagnostics PROM
on slot 10 against the contents of the
sspdiag.ppc file on volume 9
on slot 10 against the contents of the
sspdiag.ppc file on volume 9
prom -w 9:bacboot.exe 10
Erases the bootstrap PROM on slot 10 and
copies the contents of the sspboot.ppc file on
volume 9 to the PROM on slot 10
copies the contents of the sspboot.ppc file on
volume 9 to the PROM on slot 10
Any one of the following:
prom -w 9:sspdiag.ppc 9, 10
prom -w 9:sspdiag.ppc 9 10
prom -w 9:sspdiag.ppc 9-10
prom -w 9:sspdiag.ppc 9 10
prom -w 9:sspdiag.ppc 9-10
Erases the diagnostics PROMs on slots 9 and
10 and copies the contents of the sspdiag.ppc
file on volume 9 to the PROMs on slots 9 and
10
10 and copies the contents of the sspdiag.ppc
file on volume 9 to the PROMs on slots 9 and
10