Nortel 1110 사용자 가이드
Expansion Module for IP Phone 1100 series
Page 481 of 630
IP Phones
Description, Installation, and Operation
Configuration
Use LD 11 to configure the Expansion Module for IP Phones 1100 Series.
LD 11 - Configure the Expansion Module for IP Phones 1100 Series (Part 1 of 2)
Prompt
Response
Description
REQ:
NEW/CHG
Add new or change existing data.
TYPE
1120,1140,1150
For IP Phone1120E, IP Phone 1140E, and IP Phone
1150E
1150E
…
…
…
KEM
(0) - 3/<CR>
Number of attached Expansion Modules (0). Up to
three Expansion Modules are supported.
three Expansion Modules are supported.
…
…
…
CLS
KEM3
KEM3 CLS must be defined
KEY
0 - <see text>/
<CR>
<CR>
Key number range expanded to support number of
Expansion Modules specified by KEM prompt. The
range on the IP Phone is as follows:
Expansion Modules specified by KEM prompt. The
range on the IP Phone is as follows:
KEM value:
0
1
2
3
1
2
3
KEY range:
0 - 31
32- 49
50- 67
68- 85
32- 49
50- 67
68- 85
PAGEOFST
<Page> <KeyOff-
set> / <CR>
set> / <CR>
PAGEOFST is prompted if one Expansion Modules is
specified at the KEM prompt and <CR> is entered at
the KEY prompt. This prompt enables you to enter a
Page number of 0, or 1, and a Key Offset number
from 0 to 17. Once entered, the KEY is prompted
with the appropriate KEY value filled in. <CR> ends
the input.
specified at the KEM prompt and <CR> is entered at
the KEY prompt. This prompt enables you to enter a
Page number of 0, or 1, and a Key Offset number
from 0 to 17. Once entered, the KEY is prompted
with the appropriate KEY value filled in. <CR> ends
the input.