MTX txc4-1 사용자 가이드
MTX..COM
SPECIFICA
TIONS
Model
TXC4.1
TXC5.1
TXC6.1
TXC6.0
TXC.1
Description
4”
Components
Components
5-1/4”
Components
Components
6-1/2”
Components
Components
6-1/2”
Woofer
Woofer
25mm
Tweeter
Tweeter
Midbass Cone
Glass
Fiber with
Aluminum
Deposition
Fiber with
Aluminum
Deposition
Glass
Fiber with
Aluminum
Deposition
Fiber with
Aluminum
Deposition
Glass
Fiber with
Aluminum
Deposition
Fiber with
Aluminum
Deposition
Glass
Fiber with
Aluminum
Deposition
Fiber with
Aluminum
Deposition
N/A
Tweeter
Teteron
Dome
Dome
Teteron
Dome
Dome
Teteron
Dome
Dome
N/A
Teteron
Dome
Dome
Impedance
4 Ohm
4 Ohm
4 Ohm
4 Ohm
4 Ohm
Frequency
Response
Response
50Hz-25kHz
45Hz-25kHz
43Hz-25kHz
43Hz-250Hz
3.5kHz-25kHz
Power (Watts RMS)
100
125
150
150
75
Peak Music Power
200
250
300
300
150
Sensitivity @ 2.83V
88dB
90dB
91dB
91dB
91dB
Voice Coil
1.25”
1.5”
1.5”
1.5”
25mm
X-Max
2.5mm
4.8mm
4.8mm
4.8mm
N/A
Woofer Mounting
1-3/4”
2-1/4”
2-1/4”
2-1/4”
N/A
Woofer Cut-out Dia.
3-1/2”
4-1/2”
5-19/32”
5-19/32”
N/A
Tweeter Mounting
Depth
Depth
1”
1”
1”
N/A
1”
Tweeter Cut-out
Dia.
Dia.
1-7/8”
1-7/8”
1-7/8”
N/A
1-7/8”
Tweeter Mounting
Options
Options
Angle, Flush,
Surface
Surface
Angle, Flush,
Surface
Surface
Angle, Flush,
Surface
Surface
N/A
Angle, Flush,
Surface
Surface
Crossover Adjustable
Tweeter Level (dB)
Tweeter Level (dB)
0, -1.5, -3,
-4.5, -6
-4.5, -6
0, -1.5, -3,
-4.5, -6
-4.5, -6
0, -1.5, -3,
-4.5, -6
-4.5, -6
N/A
0, -1.5, -3,
-4.5, -6
-4.5, -6
Off-axis
Compensation
Compensation
0˚, 30˚, 60˚
0˚, 30˚, 60˚
0˚, 30˚, 60˚
N/A
N/A
Bi-amp Inputs
Yes
Yes
Yes
Yes
N/A
INTRODUCTION
Thank you for choosing MTX to help reach your ultimate goal with your vehicle. MTX TXC6.0 woofer are
exceptional stand alone bass driver or they can be added to a full TXC High-end Component system and
create a 3-way system with unparalleled musical detail. This full MTX TXC High-end Component system and
a matching MTX amplifi er with StreetWires connections will put you in a better position to hear, feel, and
experience all of the music the artist intended.
exceptional stand alone bass driver or they can be added to a full TXC High-end Component system and
create a 3-way system with unparalleled musical detail. This full MTX TXC High-end Component system and
a matching MTX amplifi er with StreetWires connections will put you in a better position to hear, feel, and
experience all of the music the artist intended.
The TXC6.0 wofers are part of the TXC series of component speakers which are the best in the MTX offering
of full-range speakers. They offer many added features that are designed for the distinguished listener.
Bi-amp confi guration and the 3-way system are just some of the TXC6.0 features that will help reproduce the
music with exceptional dynamics and detail regardless on mounting location and position within the vehicle.
The TXC series also offers complete component systems and a separate tweeter that further defi ne the
musical experience. The TXC.1 is an additional tweeter that adds a new dimension to the imaging and greatly
increases sound quality with superior high frequency response. Call 1-800-CALL-MTX for more information.
of full-range speakers. They offer many added features that are designed for the distinguished listener.
Bi-amp confi guration and the 3-way system are just some of the TXC6.0 features that will help reproduce the
music with exceptional dynamics and detail regardless on mounting location and position within the vehicle.
The TXC series also offers complete component systems and a separate tweeter that further defi ne the
musical experience. The TXC.1 is an additional tweeter that adds a new dimension to the imaging and greatly
increases sound quality with superior high frequency response. Call 1-800-CALL-MTX for more information.
BEFORE STARTING
MTX recommends that you have your new speakers installed by an authorized MTX retailer, prefer-
ably MECP certifi ed. If you do decide to do it yourself, make sure you have read the instructions
carefully and that you have the following tools:
•
ably MECP certifi ed. If you do decide to do it yourself, make sure you have read the instructions
carefully and that you have the following tools:
•
Electric
drill
• Phillips bit or screwdriver
•
1/8”
bit
• Door panel puller
•
Wire
cutters/crimpers
• Metal cutting tool
• Safety glasses
• 2mm hex wrench
• X-acto knife
Throughout installation, keep in mind the ultimate objective of creating an ideal soundstage and ex-
ceptional imaging. This refers to the experience you get when you sit in your seat with your head up
and shoulders straight, close your eyes, and listen. Where does the music seem to be coming from?
In an ideal world, you would hear all music from front and center, meaning it sounds like a band is
performing on your hood. Raising the soundstage is a very important process and every option should
be considered in order to have your sound as up and in front as possible.
ceptional imaging. This refers to the experience you get when you sit in your seat with your head up
and shoulders straight, close your eyes, and listen. Where does the music seem to be coming from?
In an ideal world, you would hear all music from front and center, meaning it sounds like a band is
performing on your hood. Raising the soundstage is a very important process and every option should
be considered in order to have your sound as up and in front as possible.
Removing the Door Panel
Please be aware that today’s cars have door panels that are not designed to come apart easily; they
are designed by the factory to sit tight against the door and not rattle. It is important to note that if the
proper procedures are not followed, the door panels can easily become damaged and make them fi t
improperly when you’re trying to reinstall them.
Please be aware that today’s cars have door panels that are not designed to come apart easily; they
are designed by the factory to sit tight against the door and not rattle. It is important to note that if the
proper procedures are not followed, the door panels can easily become damaged and make them fi t
improperly when you’re trying to reinstall them.
Use a door panel puller to remove the door panel, and be aware there are often hidden screws that,
if overlooked, can cause the panel to crack or break when force is applied to remove door panel. It
might be a good idea to do some research on your specifi c car to be sure they are all removed before
continuing. Even a new car owner needs to be aware of this potential issue. Buying a new door panel
is an expensive process so please take note of the potential for damage.
if overlooked, can cause the panel to crack or break when force is applied to remove door panel. It
might be a good idea to do some research on your specifi c car to be sure they are all removed before
continuing. Even a new car owner needs to be aware of this potential issue. Buying a new door panel
is an expensive process so please take note of the potential for damage.
With the door panel off, it is a perfect time to add sound dampener. The main goal of sound dampen-
ers is to add mass to the metal in the door, causing less rattle and “ring” which will help to improve
the overall sound of your new speakers. It also helps prevent against outside noise by adding insula-
tion. Sound dampening material can be purchased from your local retailer and is available in many
different forms, and kits, for many different applications. Please make sure you purchase the correct
type for your specifi c project.
ers is to add mass to the metal in the door, causing less rattle and “ring” which will help to improve
the overall sound of your new speakers. It also helps prevent against outside noise by adding insula-
tion. Sound dampening material can be purchased from your local retailer and is available in many
different forms, and kits, for many different applications. Please make sure you purchase the correct
type for your specifi c project.
Note: Before cutting anything, please use common sense and make sure that no wires or glass will
interfere with cutting tools. ALWAYS WEAR PROPER SAFETY GLASSES. Be sure all wires are clear
of moving parts such as window crank mechanisms and trunk hinges. Use rubber grommets when
running wires through sharp edged metal holes, which may wear through the wire’s insulation.
interfere with cutting tools. ALWAYS WEAR PROPER SAFETY GLASSES. Be sure all wires are clear
of moving parts such as window crank mechanisms and trunk hinges. Use rubber grommets when
running wires through sharp edged metal holes, which may wear through the wire’s insulation.
Do not mount speakers where they could come in contact with:
• The door’s window glass
• The window crank handle or gear assembly when rotated
• The trunk springs, shock towers, or trunk lid
• The gas tank or fuel lines
MTX002044 TXC6.0 Owners Manual.indd 2-3
MTX002044 TXC6.0 Owners Manual.indd 2-3
4/18/05 8:06:38 AM
4/18/05 8:06:38 AM