Lowrance 7200c 작동 가이드

Install the gimbal bracket. Place the bracket so the arms slope toward

the front of your unit.

Once a location is determined, use the bracket as a template and mark

the mounting holes and the hole for the cables. Drill a 1-inch (25.4 mm)

hole in the dash for the power, transducer and antenna cables. Screw

the bracket to the mounting surface.

Front view (left) and side view (right) showing dimensions of the

GlobalMap 7200 and GlobalMap 7300 mounted on gimbal brackets.

Front

Screw
mounting
hole

Cable hole

Millimeter

[Inch]