Lowrance hunt 작동 가이드
32
Map Mode Practice Run
Start outdoors, with a clear view of the open sky. As you practice, try
navigating to a location a few blocks away. Navigation in too small a
space, like a backyard, will constantly trigger arrival alarms.
navigating to a location a few blocks away. Navigation in too small a
space, like a backyard, will constantly trigger arrival alarms.
1. Install two AA batteries (and MMC card if desired) in battery com-
partment on back of case. (See installation details beginning on page 7.)
partment on back of case. (See installation details beginning on page 7.)
2. To turn on iFINDER PhD, press and release
PWR
key.
3. The opening screen displays either a map of North America or the
music player. If the Music Mode opens up, press the
music player. If the Music Mode opens up, press the
MAP/MUSIC
key to
switch to Map Mode.
4. Wait while unit locates satellites and calculates current position. Flash-
ing question mark or data boxes indicate a position has not been deter-
mined. Position calculation takes an average of one minute or less under
clear sky conditions (unobstructed by terrain or structures). When position
is found, a tone sounds, a position acquired message appears, data boxes
stop flashing and the flashing question mark disappears.
ing question mark or data boxes indicate a position has not been deter-
mined. Position calculation takes an average of one minute or less under
clear sky conditions (unobstructed by terrain or structures). When position
is found, a tone sounds, a position acquired message appears, data boxes
stop flashing and the flashing question mark disappears.
5. With position acquired, the Map Page shows your location on the
map in a bird's eye view of the earth. You can move around the map by:
Zoom in closer to see greater detail: press
map in a bird's eye view of the earth. You can move around the map by:
Zoom in closer to see greater detail: press
ZIN
(zoom in key.)
Zoom out to see more area, less detail: press
ZOUT
(zoom out key.)
Scroll map north, south, east or west using arrow keys
↑ ↓ → ←.
To stop scrolling and return to current position on map, press
EXIT
key.
6. Set a waypoint at your current position so you can navigate back
here: press
here: press
ENT
|
ENT
.
7. Zoom/scroll map to find a nearby object or location. Use arrow keys to
center cursor cross-hair over the map object or location.
center cursor cross-hair over the map object or location.
8. To navigate to the selected location: press
MENU
|
↓ to
G
O
T
O
C
UR-
SOR
|
ENT
|
EXIT
. Follow steering arrow on map display or press
MENU
|
ENT
to follow compass bearing arrow on navigation display.
9. At destination, Arrival Alarm goes off; to clear it, press
EXIT
. Cancel
navigation: press
MENU
|
MENU
|
↓ to
C
ANCEL
N
AVIGATION
|
ENT
|
←
to Y
ES
|
ENT
.
10. Now navigate back to your starting waypoint. Press
FIND
|
↓ to
M
Y
W
AYPOINTS
|
ENT
|
ENT
|
↓ to select the waypoint you created in step
6|
ENT
|
ENT
. Wait while route is calculated, then follow arrows.
11. Back home, Arrival Alarm goes off; press
EXIT
. Cancel navigation:
press
MENU
|
MENU
|
↓ to
C
ANCEL
N
AVIGATION
|
ENT
|
←
to Y
ES
|
ENT
.
12. To turn off iFINDER, press and hold
PWR
key for three seconds.