Rimage prism 사용자 가이드
Introduction
Introduction
This manual provides the information needed to set up, install, and operate the Prism printer and to identify
the parts.
the parts.
Operating System Requirements
The Prism is compatible only with Windows 2000, Windows XP, and Windows Server 2003. It requires one
USB port or one parallel port.
USB port or one parallel port.
Media Requirements
You must use discs that are coated with a surface designed for thermal printing. The media in Rimage
Media Kits™ is designed for optimum use in the Prism.
Media Kits™ is designed for optimum use in the Prism.
For information about Rimage Media Kits™ – convenient packages of discs and ribbons, all guaranteed by
Rimage – contact Rimage at 800-445-8288.
Rimage – contact Rimage at 800-445-8288.
Ribbon Requirements
The Prism printer requires ribbons designed specifically for use with the printer. The table below lists the
type of ribbon to use with your printer.
type of ribbon to use with your printer.
Ribbon Color
Part Number
Number of Discs Printed
Black 201737-006
2100
Red 202082-002
2100
Midnight Blue
203217-001
2100
Multicolor 202506-001
500
Store the ribbons at -5
°C (23°F) to 40°C (104°F) and at 30-80% relative humidity, non-condensing. Avoid
direct sunlight.
Label Design Requirements
•
Resolution – Use pictures or logos set to 300x300 DPI (Dots Per Inch) or 300x600 DPI.
•
Label Design Size – The width is 5.12” (1536 pixels) and the height is 4.52” (1356 pixels).
•
Printable Area – The printable area of a disc when using a Prism printer is 116 mm (4.567”) and the hub
is 38mm (1.496”).
is 38mm (1.496”).
Printable Area
116 mm
Hub Size
38 mm
110635_I
1