PROSCAN psvr71 사용자 가이드
10
Setting Up the VCR
Auto Channel Search
Use the Auto Channel Sear
ch feature
to place all available channels in
memory
.
If you ever change cable or antenna
signals, you may need to
Auto Channel
Search again.
CABLE BOX SETUP
The VCR will now
receive all signals
from the cable box
on channel 04.
receive all signals
from the cable box
on channel 04.
Press MENU to continue
Once you complete the setup, the on-screen menus confirm
that the VCR will receive all signals on the designated channel.
that the VCR will receive all signals on the designated channel.
VCR Channels List
If you use a cable box for
all channels, this step is not necessary.
Your VCR may come with a channel list preset at the factory. Even
though your VCR may come with such a list, it’s possible that you
will want to add or delete certain channels depending on whether
they are active.
though your VCR may come with such a list, it’s possible that you
will want to add or delete certain channels depending on whether
they are active.
Auto Channel Searching
1. Press MENU to display the VCR MAIN MENU.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Setup
6 Preferences
7 Audio
8 Language
0 Exit
6 Preferences
7 Audio
8 Language
0 Exit
2. Press 4 to display the CHANNELS menu.
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: CABLE
4 VCR Plus+ Channel List
5 Cable Box Setup
3 Signal Type: CABLE
4 VCR Plus+ Channel List
5 Cable Box Setup
0 Exit
3. Press 1 to display the AUTO CHANNEL SEARCH menu.