PROSCAN psvr71 사용자 가이드

19

Setting Up the VCR

In the preferences menu, press 1 to select the Remote Control feature.
Then press the VCR2 button to change.

      PREFERENCES

< PRESS VCR2 TO CHANGE >

2 Auto Play:      ON
3 Auto TV/VCR:    ON
4 EnergySaver:    2:00
5 Front Panel:    AUTO
6 Tape Speed:     SLP
7 Commercial Advance

0 Exit

  

      PREFERENCES

1 Remote Control: VCR2

2 Auto Play:      ON
3 Auto TV/VCR:    ON
4 EnergySaver:    2:00
5 Front Panel:    AUTO
6 Tape Speed:     SLP
7 Commercial Advance

0 Exit

The VCR will only respond to the VCR2 button. To change the remote
setting back to VCR1, display the PREFERENCES menu, press 1, and
then press the VCR1 button on the remote.

Auto Play

This feature allows the VCR to automatically start playing when you
insert a tape with the safety tab removed. Press 2 to switch between
ON or OFF.

•

Select ON if you want a tape with its safety tab removed to start
playing automatically when the tape is inserted.

•

Select OFF if you 

do not want a tape with its safety tab removed

to start playing automatically.

Auto TV/VCR

This feature controls whether the TV/VCR switch changes
automatically to the VCR mode, when the VCR is turned on.
Press 3 to switch between ON and OFF.

•

Select ON if you want the VCR to switch to the VCR mode when
the VCR is turned on or a cassette is inserted. 

This only applies if

you connect the IN FROM ANT. and OUT TO TV jacks of your
VCR and TV and watch your VCR on channel 3 or 4 of your TV.

•

Select OFF if you want the VCR to remain in the TV mode. This is
useful if you watch your VCR on the TV’s video input and you
don’t want your antenna/cable signal interrupted by the VCR.