PROSCAN psvr71 사용자 가이드

52

Other Features

      ZERO SEARCH

Current tape counter is
        2:17:25

Press REV to go to
        0:00:00 

Press SEARCH to exit

      ZERO SEARCH

Searching for
0:00:00...

Press STOP to cancel

Zero Search

The Zero Search feature enables the VCR to quickly return to a counter
reading of 0:00:00 anywhere on the tape. This is especially convenient
when you want to repeat a segment of the tape several times.

1. Go to the beginning of the program you wish to return to.

2. Press CLEAR twice to reset the counter to 0:00:00.

3. Continue playing the tape.

4. Press STOP.

5. Press SEARCH on the remote until the ZERO SEARCH screen

appears on the TV screen.

6. Press REVERSE (REV) to return to 0:00:00 on the tape.

7. Press STOP to stop zero searching.

Pro-Tect Plus

™

 Locking Feature

To disable the usage of the VCR, or to protect your timer recordings,
you can lock the VCR so that the buttons on the VCR or remote won’t
work.

To Lock: Press and hold either the remote control’s ON•OFF,
VCR1, or VCR2 button (whichever controls your VCR) until LOCK
appears in the display. LOCK appears when the feature is activated
and if you attempt to turn on the VCR while the feature is on.

•

To unlock the feature and turn on the VCR: Press and hold either
the remote’s ON•OFF, VCR1, or VCR2 button (whichever button
your VCR is set to respond to) until LOCK disappears.

Tracking

Your VCR has automatic tracking which removes the streaks or noise
from the picture. Automatic tracking is activated when you insert a
tape or turn on the VCR. Occasionally you may need to manually
adjust tracking, especially if the tape was recorded on a different VCR.
Use the TRACKING buttons to remove the streaks or noise. You can
also use tracking when you PAUSE a tape to reduce jittering of the
picture.

When you manually adjust the picture, automatic tracking is turned
off. To turn automatic tracking back on, ejec t the tape and re-insert it.

Tracking has no effect during recording—only playback.