PROSCAN psvr71 사용자 가이드
57
Connections
Things to Know Before
Connecting Components
Connecting Components
Protect Your Components
from Power Surges
•
Connect all components before plugging any
power cords into the wall outlet.
power cords into the wall outlet.
•
Always turn off the TV and other components
before you connect or disconnect any cables.
before you connect or disconnect any cables.
Position Cables Correctly to Avoid
Audio Hum or Interference
•
Insert all cable plugs firmly into their jacks.
•
Place the audio/video cables to the sides of the
TV’s back panel instead of straight down the
middle after you connect your components.
TV’s back panel instead of straight down the
middle after you connect your components.
•
Try not to coil any twin-lead cables and keep
them away from the audio/video cables as much
as possible.
them away from the audio/video cables as much
as possible.
•
Make sure all antennas and cables are properly
grounded. Refer to the Safety Tips sheet packed
with your unit.
grounded. Refer to the Safety Tips sheet packed
with your unit.
Protect Your Components from
overheating
•
Do not block ventilation holes in any of the
components. Arrange the components so that
air can circulate freely.
components. Arrange the components so that
air can circulate freely.
•
Do not stack components.
•
Allow adequate ventilation when placing your
components in a stand.
components in a stand.
•
Place an amplifier or satellite receiver on the
top shelf of the stand so heated air rising from it
will not flow around other components.
top shelf of the stand so heated air rising from it
will not flow around other components.
5
➣
➣
Setting Up the VCR
2
First Things First
1
➣
Recording
3
VCR Basics
4
➣
Other Features
6
5
7
➣
➣
➣
8
Connections
Reference
Program The Remote